Provide uniform ink speed three adjustable 450 to 800rpm, color development speed three adjustable 12 to 25rpm, color development pressure range -20 to 80, support ordinary or UV ink roller, improve work efficiency and applicability.
The multi-stage color development structure can simultaneously print 4 color strips of different thicknesses or Hue, and the uniform ink speed can be adjusted by 500-800rpm in three gears. With the Basis Weight instrument, the ink layer thickness is precisely controlled, and the operation is simple and durable.
It can display 45 × 210mm and 106 × 210mm color bars simultaneously, providing 450-800 rpm ink leveling speed and 1-120 seconds ink leveling time adjustable, with built-in pressure adjustment to ensure accurate and stable color.
Adopt gear pair drive, hand-pressed operation, rated load 500N, Travel 70mm, the upper and lower height of the frame can be adjusted, Force Gauge has a positioning structure, suitable for batch testing.
Using stainless steel material, range 0~ 300μm, Graduation 15μm, wheel structure with dial, by comparing Coating adsorption quickly read Film thickness, to ensure the construction mass.
Driven by numerical control motor, swirl/spin accuracy of 0.1 degrees, support multi-color inks Hue, concentration detection, can anticipate dry and wet ink color change and Abrasion Resistance, 5-10 minutes rapid color development, significantly reduce inks waste.
Using stainless steel material, range 0~ 50μm, Graduation 2μm, wheel structure with dial, by comparing the scale and Coating adsorption quickly evaluate the wet film thickness to ensure the construction mass.
Multi-color superposition sampling and color development at the same time, sampling can be done without boot printing, anilox roller adopts metal rubber roller structure, color development rubber roller Hardness 75 °, high processing accuracy and small amount of glue.
Made of stainless steel, range 0~ 100μm, Graduation 5μm, wheel structure with dial, can quickly and accurately read the wet film thickness, to ensure the construction mass of Coating.
Using stainless steel material, range 0~ 2000μm, Graduation 100μm, wheel structure with dial, by comparing the scale and Coating adsorption quickly evaluate the wet film thickness to ensure the construction mass.
Made of stainless steel, range 0-1000 μm, Graduation 50 μm, wheel structure with dial, can quickly and accurately read the wet film thickness, suitable for a variety of Coating application scenarios.
Made of stainless steel, range 0~ 200μm, Graduation 10μm, wheel structure with dial, rapid and accurate evaluation of wet film thickness by comparing Coating adsorption, easy to operate.
Made of stainless steel, range 0~ 500μm, Graduation 20μm, wheel-shaped structure with dial, can quickly and accurately read the wet film thickness, to ensure Coating construction mass.
Adopt hand-crank mechanical pressurization method, Heating power 650W, Mold sleeve specification < 40mm, suitable for small or irregular samples, support thermosetting material inlay.
Using stainless steel, range 0~ 25μm, Graduation 1μm, wheel structure with dial, through the inner and outer rim clearance contrast quickly read the wet film thickness, in line with a number of international standards.
