Thrust sampling mode, cutting edge pressure sample 25mmx100mm and gluing sample 25mmx80mm, sampling thickness range of 18mm, suitable for Corrugated Board and carton mass detection.
Can cut 25 * 100mm sample, sampling error +/- 0.5mm, sampling thickness range of 18mm, fast and accurate completion of Corrugated Board Edge Crush Test and adhesive strength test sample preparation.
It can cut 32.2cm ² and 64.5cm ² samples, the sampling error is less than 0.5cm ², and the maximum sampling thickness is 15mm, which meets the accurate sampling requirements of Corrugated Board Flat Crush Test.
Sampling area 100cm ² and error +/- 0.35cm ², removable knife edge sharp handle, with anti-cutting hand protection device, can handle Paper thickness 0.1~ 1.2mm and Corrugated Board 0.1~ 7mm.
Equipped with A/B/C/E four kinds of corrugated pins, the diaMeter of the pins is Φ 2-3mm, the straight line is arranged without bending, and the unit length Corrugated Board gluing line can be separated to meet the testing needs of different sizes of paper pRoducts.
Using Taiwan SDI blade and Japan SK4 high carbon steel material, sharp and durable; sampling accuracy +/- 0.5mm, thickness range ≤ 10mm; novel design, flexible sampling standardization, less burrs.
The linear guide is used to ensure smooth and fast sampling, and the imported tungsten sheet is cut without burrs and durable. It supports 18mm thickness sampling, and can cut 25 × 100mm and 25 × 80mm samples.
The imported sliding track is used with the blade to cut multi-layer Cardboard samples, the sampling size error is +/- 0.5mm, the sampling thickness range is 18mm, the scale laser engraving is clear and wear-resistant, and the strong magnet is convenient for blade installation.
Using three-point positioning method and High Accuracy coaxial concentric process, the parallelism of the two long sides is less than or equal to 0.015mm, the sampling thickness is 0.1-1.2mm, the built-in spring resilience coefficient decays more slowly, and the chrome steel tool has high durability after high temperature quenching.
Adopting imported sliding track and blade, it can cut samples with accurate parallelism, Measurement range 10~ 1000mN, cutting size 100 × 60mm, scale laser engraving clear and wear-resistant.
Suitable for a variety of Corrugated Board adhesive strength test, equipped with different specifications of steel needles, needle diaMeter range 1.0-3 mm, support A, B, C, E corrugated test, sample size 25 × 80mm.
The sampling area is 100cm ², the sampling thickness range is 0.1-1 mm, and the sampling error is +/- 0.35cm ². It is suitable for paper Basis Weight determination and sheet burst resistance test standard sample sampling.
It can quickly and accurately cut the standard sample with a diaMeter of 125mm, and the sampling thickness range is 0.1-0. It is suitable for the determination of paper Water Absorbency and is a special tool for the preparation of laboratory standard samples.
Sampling size Φ 125mm error +/- 0.2mm, thickness range 0.1~ 2.0mm, suitable for paper Cardboard surface water absorption weight detection, easy operation and high accuracy.
Cutting sample area of 100cm ², accuracy +/- 0.35, suitable for paper single or multi-layer 0.1-5 mm and ordinary Cardboard single layer < 6mm thickness, compact structure and labor-saving operation.
