Textile Color Matching Light Box

The textile color matching light box simulates standard light sources such as daylight and fluorescent light to illuminate textiles, allowing observers to compare color differences under uniform lighting conditions. It is used for color quality control in the textile industry to avoid color difference judgment deviations caused by varying light sources.
Selection
When selecting, ensure that the light box includes a D65 daylight source, with stable color temperature and a color rendering index above 90. The interior of the box should be a neutral gray, non-reflective surface, and feature automatic light source switching. Regularly calibrate the light tubes using standard color cards to ensure consistent illumination throughout their service life.

Terms

Standards

Instruments

Provide adjustable illuminance and Color temperature visible light, Color temperature range 2300K-8000K, illuminance up to 3000LX, infrared wavelength 850nm optional, radiation intensity greater than 400uW/CM ², stable light color without stroboscopic, life over 10,000 hours.

$ 5850.00

With a standard 45 degree tilt angle, the same as the light box base color does not interfere with the viewing effect, Dimension 395 * 350mm, weight 1.2Kg, flexible placement and easy to disassemble and transport.

$ 106.00

In line with the LOVIBOND color scale standard, the sub-field of view Color matching Sensitivity is high, the Measurement range is red 0.1-79, yellow 0.1-79 LOVIBOND units, and the structure is simple and easy to operate.

$ 599.00

Transmission surface uniformity of more than 93%, Color temperature adjustment range 2300K-8000K, Illuminance adjustable 0-160,000 Lux, Support Frequency adjustment 1-100KHz, life of more than 10,000 hours, can be connected through RS485 or WIFI computer control.

$ 5366.00

Color temperature adjustment range 2300K-8000K, illumination adjustment range 0-4000Lux, built-in mobile slide can move the camera front and rear, light source light board can swirl/spin to adjust the angle, provide a uniform lighting environment.

$ 5366.00

Using high-power LED Illuminant, Color temperature adjustment range 2300K-8500K, illumination up to 3000LX, life more than 10,000 hours, uniform irradiation surface and no stroboscopic, flexible adjustment of light box position and angle according to test requirements.

$ 12305.00

Equipment provides a variety of standard illuminant options, maximum support three Illuminant, high CRI = 98, with Illuminant Timer, uniform lighting, easy to operate, suitable for Color Comparison.

$ 848.00

With three light source system, color rendering index up to 98, all metal structure with three drawer, table size 1350 * 900mm, in line with ISO3664 international standards.

$ 2365.00

Imported matte aluminum reflector to achieve uniform lighting, equipped with six kinds of Illuminants including D65 and UV, table size 700 * 530mm to meet a variety of color requirements.

$ 687.00

The uniformity of the transmission surface exceeds 90%, the standard four-speed Color temperature is adjustable, the illuminance adjustment range is 0-120000Lux, and the thickness dimming knob is equipped to achieve precise control. Illuminant has no stroboscopic and the lifespan is more than 10,000 hours.

$ 5237.00

With CRI = 98 high color rendering index and 6500K color temperature, lamp with Timer, all-metal structure, large folio size for easy operation, can be hung and installed to ensure accurate Color comparison.

$ 719.00

Equipped with five Illuminants including D65 and UV, can activate multiple Illuminants simultaneously, built-in lamp Timer, ISO 3664 and ASTM D1729 compliant.

$ 4857.00

Adopt high-power high-illumination LED Illuminant, Color temperature adjustment range 2300K-8500K, illuminance adjustment range 0-3000LX, no stroboscopic design life of more than 10,000 hours, uniform illumination surface can flexibly adjust the position angle.

$ 5366.00

Color temperature adjustment range 2300K-8000K, illumination adjustment 0-1.3 million Lux, Frequency adjustment 1-100KHz, support RS485 to USB and WIFI connection, life up to 10,000 hours or more, to meet a variety of test conditions.

$ 4269.00

Using high-power LED Illuminant, Color temperature adjustment range 2300K-8500K, illuminance adjustment range 0-3000LX, life of more than 10,000 hours, uniform irradiation without stroboscopic.

$ 7464.00

Articles

Rotation Speed of Sample Rack in Hot Air Aging Test Chamber on Color Fastness of Textiles
This article explores the influence of the rotation speed of sample racks in a hot air aging test chamber on the color fastness testing of textiles. The rotation speed affects the flow of hot air and temperature uniformity inside the chamber, thereby altering the heating conditions of the samples and leading to variations in color fastness results.
Application of Automatic Film Coating Machine in Waterproof Coating Finishing of Textiles
Automatic film coating machines are used for waterproof coating finishing on textiles, enabling precise control of coating thickness, improving uniformity and production efficiency.
Conductive polymer coatings for smart textiles are applied onto fabrics using a coating machine.
This article introduces the coating techniques of conductive polymer coatings in smart textiles.
From Elmendorf Method to Trouser Tear Method: A Guide to Selecting Tear Testers
Tear strength is a crucial indicator for evaluating the mechanical properties of materials, widely used in quality control and research and development across industries such as paper, plastic films, textiles, leather, and composite materials. Accurately assessing a material's resistance to tearing is essential for predicting its durability in practical applications.
How to Choose the Right Contact Angle Measuring Instrument Based on Sample Characteristics
Contact angle measurement is a key method for evaluating the wettability of solid surfaces and is widely used in fields such as materials science, coating industry, textile testing, electronic packaging, and environmental monitoring.
Application of Xenon Lamp Aging Test Chambers in Material Weathering Testing
The xenon lamp aging test chamber utilizes xenon arc lamps to simulate sunlight, combined with temperature, humidity, and spray conditions, to accelerate the aging process of materials. It is primarily used to evaluate the weather resistance of non-medical materials such as coatings, plastics, and textiles, helping to predict product lifespan.
Application of Laboratory Coating Machines in Textile Coating
A laboratory film applicator is a precision instrument used in textile coating research and development as well as quality control. It creates uniform wet films on substrates through mechanical coating. Primarily designed for small-scale sample preparation, it assists researchers in optimizing coating formulations and process parameters.