Temperature control accuracy of +/- 0.1 ℃, no-load minimum temperature -20 ℃, using fully enclosed Compressor unit and anti-corrosion cycle system, energy saving and anti-scaling, can continue to work at room temperature.
The output current is continuously adjustable from 3 to 30A, the no-load output voltage is adjustable from 5 to 300V, and the Power factor is adjustable from 0.3 to 0.999. It supports independent adjustment of load paraMeters and preset test times.
With Speedsafe ™ safe speed protection to prevent motor no-load acceleration damage; with chemical corrosion resistant ABS shell, lightweight and durable. Speed range 100~ 1000rpm, Max. stirring Capacity 1 liter.
DC motor no-load operation for more than 10,000 hours, no noise and no vibration, stirring speed 0-2000rpm, working disk size Φ 120mm, suitable for a variety of experimental environments.
Rated load 1000N, Travel 100mm, manual operation is stable, can adapt to a variety of Force Gauge, suitable for tension and compression load and plug force test, horizontal structure for desktop installation.
The maximum load is 30KN, and the wedge structure design is adopted to ensure that the sample is firmly clamped during the test, which is suitable for the mechanical performance testing of high-strength materials.
Measurement load value 300N, sampling speed 120Hz, can store 99 sets of data and automatically calculate statistical values, support six unit swaps and three test modes, with upper and lower limit comparison alarm function.
Using DC motor, no-load operation can reach more than 10,000 hours, no noise and no vibration; heating temperature can reach 75 ° C, speed range 0-1200rpm, support two-way Stir, electrical control adopts fast IT microcontroller, high adjustment accuracy and fast Response.
Maximum load 100KN, suitable for bending testing of various materials, with high load-bearing capacity and Stability, to meet different testing requirements.
Maximum load 50KN, suitable for a variety of material testing, providing a stable and reliable clamping force to ensure that the sample does not slip during the test, suitable for high load test environment.
Using DC motor to ensure no-load operation for more than 10,000 hours, no noise vibration; fast IT microcontroller to achieve accurate adjustment of speed and temperature, support dry burning, water Bath and oil Bath various working modes, Temperature range RT +~ 300 ℃, heating power 800W.
The maximum load is 50KN, and the Y-shaped structure design is adopted to ensure stable clamping during testing, which is suitable for tensile performance testing of high-strength materials.
Measured value 30KN, Graduation load 0.01KN, with small size, light weight, high accuracy and automatic alarm function, suitable for vibration-free environment.
Heating power 800W, speed range 0-2600 rpm, support vacuum reaction and pressure reaction for a long time stirring, with durable magnetic steel and PTFE stirrer.
Maximum load 0.5KN, stable and reliable clamping, suitable for a variety of material testing, compact and durable structure.
