Adapt to a variety of Viscometer use, suitable for factory field applications, real-time printing measurement results, no need to hand copy, easy operation, can save labor time.
The test program can be uploaded to the Viscometer host, the analysis record data can be collected, the rheological Linear dispersion and Excel can be generated, and five sets of data can be plotted and compared at the same time.
Measurement accuracy of 0.1 ℃, range of 0~ 100 ℃, real-time display of temperature values, suitable for a variety of Viscometer models, to ensure a stable test environment.
Silicone oil standard solution, calibrated viscosity 380cp, capacity 400ml, suitable for Viscometer calibrating.
Measurement accuracy +/- 2%, equipped with 5 calibrated oils to ensure measurement accuracy, as a special accessory for cone-plate viscoMeter to achieve stability testing.
The shear rate is 2.0N, only 0.5ml sample volume can be completed to complete the test, suitable for a variety of models of Viscometer host, to meet the measurement needs of different viscosity ranges.
Provides accurate viscosity values of 5.7cp, 400ml per bottle for Viscometer calibrated measurement Stability and Reliability.
Range 5-50p, accuracy of +/- 2%, equipped with 5 kinds of special calibrated oil to ensure measurement accuracy, as the core component of cone-plate viscoMeter to ensure test Stability.
Shear rate 3.84N, sample size only 0.5ml, suitable for a variety of Viscometer models, ensuring High Accuracy measurement and wide applicability.
Wet film thickness 13.7 μ m, formed process without wire-wound, wear-resistant stainless steel material, total length 40cm, application width 30cm, easy to clean.
Using one-piece casting process, strong and not easy to deform, maintaining test parallelism; Measurement range 0~ 4mm, resolution 0.01mm, contact pressure 100 +/- 10kPa, contact area 2 +/- 0.05cm ², in line with standard requirements.
Spreader formed process to ensure uniform, wet film thickness of 80 microns, diaMeter 10mm design and stable operation, 304 stainless steel material durable and unbroken wire, easy cleaning and maintenance.
Spreader formed process to ensure uniform wear-resistant stainless steel material corrosion-resistant durable, wet film thickness of 450 μ m, effective application width of 300mm, without the handle directly grip operation.
Using formed process, wear-resistant stainless steel material is easy to clean and anti-corrosion, the total length is 400mm, the effective application width is 300mm, and the wet film thickness is 550μm.
Using formed process, wear-resistant stainless steel material is easy to clean and anti-corrosion, the total length is 400mm, the effective application width is 300mm, and it can be prepared with 275μm wet film thickness, without the handle directly holding the scraping.
