The blade width is 100mm and the height is 60mm, and the Rod length is 300mm, generating tangential flow and high shear rate to prevent medium deposition, making it suitable for low-speed stirring.
When stirring, a tangential flow is generated, and a high shear rate is formed at the edge to prevent medium deposition. The blade width is 100mm and the height is 60mm, and the Rod diaMeter is 8mm, which is suitable for low-speed and mild stirring.
Low-speed running torque output of 94N.cm, using multi-stage Non-metallic gear transmission force, stable running state and low noise, stepless speed range of 100~ 1400rpm, suitable for a variety of Impeller and containers.
The use of low-speed intermittent barrel edge stirring, mixing inks evenly within five minutes without heating up, Speed range 0~ 60rpm, L-type paddle stirring design is clean and simple, direct transmission to reduce power loss.
Three cutting methods are available, with a maximum cutting diaMeter of 30mm. It is equipped with a 7-inch Touchscreen and a fully enclosed safety protection structure. The work surface is made of stainless steel, and fast clamps and vertical clamps are provided to meet different sample clamping needs.
The application width can be adjusted freely, and the drawdown blade Coater can be adapted to meet different experimental testing needs and realize flexible film operation.
The Spin Coater is controlled by touch screen, the acceleration range is 100~ 4000rpm/s, and the speed can be automatically corrected by A/K selection. The motor torque is large and the operation is smooth, which is suitable for the assembly line process.
Adopt bar and drawdown blade composite coating method, bar accuracy +/- 0.005mm, drawdown blade thickness range 0.1-10 mm, Vacuum Area 1280 * 960mm, coating speed 1~ 300mm/s stepless speed regulation, suitable for wide voltage input.
Using series micro motor and multi-stage Non-metallic gear drive, Max. Torque reaches 94N.cm, Speed range 100-1400rpm, stable operation, low noise and support for a variety of Impeller adaptations.
The series micro motor provides 94N.cm Max. Torque, multi-stage Non-metallic gear drive to achieve torque doubling, support 100-1400rpm stepless speed regulation and 28L Processing capacity, stable operation and low noise.
With bar and drawdown blade dual Spreader function, coating speed 1-300mm/s stepless speed regulation, Spreader accuracy of +/- 0.003mm, clamshell drawdown blade design for easy cleaning, servo motor drive to ensure smooth operation.
Using meyer Rod coating accuracy +/- 0.001mm and Blade Coating accuracy +/- 0.003mm, clamshell Drawdown blade is easy to clean, supports 1-300mm/s stepless speed regulation, Glass countertop heat resistance 600 ℃ and scratch resistance.
Drawdown blade and bar coating method, with Vacuum chuck function, high film thickness control accuracy, application length and speed can be adjusted freely, easy to clean, suitable for a variety of substrates.
Blade Coating method, coating speed 1~ 300mm/s stepless speed regulation, film thickness control accuracy +/- 0.003mm, with heating and Vacuum chuck function, clamshell drawdown blade design for easy cleaning, suitable for High Accuracy automatic film.
Mixing method of low speed intermittent sticking barrel edge, professional Impeller design, can be thoroughly stirred in 10 minutes without heating up, Speed range 0~ 50rpm adjustable, easy to replace stainless steel Mixing Tank.
