The wet film thickness can be controlled by 1.5μm, the bottom of the groove is wider and the Coating Weight is large, and the extrusion process and chrome plating surface are adopted, which is not easy to loosen the broken wire, easy to clean and not blocked.
It can control the wet film thickness as low as 1.5μm. It adopts extrusion process and 304 stainless steel material. The bottom of the groove is wider and the Coating Weight is larger, and it is not easy to loosen and break the wire, and it is easy to clean.
Using extrusion process and 304 stainless steel material, the wet film thickness can be controlled by 1.5μm, and the bottom of the groove is wider to increase the Coating Weight, so as to avoid the problem of steel wire loosening and blockage.
Wire-wound structure, wet film thickness 4μm, diaMeter 12.7mm, total length 585mm, wire diaMeter 0.05mm, stainless steel material to ensure durability and precise coating control.
The wire-wound design ensures uniform coating application, with a wet film thickness of 109.7 microMeters and a coating width of up to 300 milliMeters, making it suitable for surface treatment on a variety of substrates.
The wet film thickness can be as low as 1.5 μm, the groove bottom is wider to provide greater Coating Weight, the chrome plating surface and extrusion process ensure durability and easy cleaning, avoiding the problem of traditional steel wire loosening.
Using a wire-wound coating process, with a wet film thickness of 32.0 μm and a coating width of 300 mm, it is suitable for substrates prone to curling and convexity, enabling uniform wet film coating, with a wire diaMeter of 0.36 mm.
Using extrusion process and 304 stainless steel material, the minimum wet film thickness can be controlled by 1.5 μm, and the groove design provides greater Coating Weight to avoid wire loosening and clogging problems.
The wet film thickness can be as low as 1.5μm to achieve ultra-thin Spreader; the bottom of the groove is wider, and the Coating Weight is larger; the extrusion process is adopted to avoid the problem of loose wire and broken wire, and it is easy to clean.
Using extrusion process and 304 stainless steel material, the minimum wet film thickness is 1.5μm, the groove design is wide to improve the Coating Weight, avoid the problem of loose wire, and the surface chrome plating is easy to clean and maintain.
Using extrusion process and chrome plating surface, the minimum wet film thickness is 1.5μm, and the groove design is wide to improve the Coating Weight, avoid the problem of steel wire loosening and clogging, and facilitate cleaning and shape adjustment.
Using wire-wound process, wet film thickness 12 μ m, application width 220mm, through precision winding stainless steel wire to form a uniform groove, to achieve precise and controllable Coating thickness.
The precision drawing stainless steel wire winding process is used to form uniform grooves to control the Coating thickness, the wet film thickness reaches 120μm, and the application width is 220mm to ensure the accuracy and repeatability of the coating.
Using extrusion process and chrome plating surface, the wet film thickness can be as low as 1.5 μ m, and the groove design is wide to improve the Coating Weight, which solves the problem of traditional steel wire loosening and cleaning difficulties, and realizes stable ultra-thin Spreader.
Made by wire-wound process, wet film thickness 50μm, application width 420mm, uniform groove is formed by precision stainless steel wire winding to achieve accurate control of Coating thickness.
