Measurement range 0~ 100HC, error +/- 1HC, suitable for the detection of microporous materials with stress above 0.049MPa when the compression rate is 50%.
Measurement range 20-90HC, resolution 1HC, Indication Error ≤ +/- 1HC, suitable for microporous hardness of materials testing.
The pressure spring constant linear relationship, pressure needle Travel 0-2.5 mm, measurement error +/- 1HC, can be hand-held or installed measuring frame, suitable for shoe microporous hardness of materials testing.
Can be used with A type or C type Shore DuroMeter, fixed load weight mass 0.75 +/- 0.05kg, hardness Gauge clamping Rod connection size M7x0.5mm, improve hardness testing accuracy and Stability.
Suitable for the determination of materials with high Hardness, Measurement range 20-90HD, Indication Error ≤ +/- 1 HD, using Dial display, easy to operate, suitable for rubber and plastic and microporous materials.
Dial design can maintain the maximum Measured value display, Measurement range 0-100 Shore, accuracy up to 1shore, made of wear and corrosion resistant stainless steel aluminum oxide material.
Suitable for medium hard resilience, rubber or microporous materials, Measurement range 0-100HE, more suitable for thinner or curved samples, can be used with handheld or supporting bench.
Supporting D-type Shore DuroMeter, applying 5kg test force by weight, equipped with Glass bench and adjusting nut to ensure full contact with the sample and improve measurement Stability.
The pressure spring is used to achieve a constant linear relationship, the pressing needle Travel 0-2.5 mm, measurement error +/- 1HC, can be used in hand or installed on the measuring rack, suitable for the test of microporous materials for shoes.
Measurement range 20-90HA, Indication Error ≤ +/- 1HA, can determine a variety of hardness of materials, easy to operate and high accuracy, suitable for laboratory and field testing.
Suitable for low hardness rubber and sponge determination, measurement range 20-90HAO, resolution 0.1HAO, support real-time mode, peak mode, automatic timing and average mode.
Using D type High Accuracy Impact device, Measurement range 30~ 110HS, can detect cast steel roll, forged steel roll and cast iron roll three kinds of hardness of materials, with anti-Impact and anti-electromagnetic interference ability, support 7 kinds of Hardness standard automatic conversion.
Suitable for low Hardness Rubber and Sponge Determination, Measurement range 20-90HAO, Indication Error ≤ +/- 1HAO, Portable design for quick field testing.
Pin Travel 0~ 2.5mm, Measurement range 0~ 100HA, error +/- 1HA, can be used in the matching measuring rack or handheld, to meet a variety of rubber hardness testing needs.
Measurement range greater than 90A, resolution up to 0.1H, with MAX Maximum latch and automatic shutdown function, support USB and Bluetooth data output, to meet a variety of hardness of materials testing needs.
