Supports more than 30 chroma indicators, Measurement accuracy ≤ E * ab ≤ 0.01, single measurement only takes 1.5 seconds, minimum liquid addition is as low as 1ml, equipped with thermostatic sample tank and 7 inch Touchscreen.
Internal fixed capacity 100ml, reduced bubble effect by compression mechanism, high measurement Repeatability, equipped with desktop stand and cleaning brush, suitable for a variety of liquid density tests.
Set dispersion and Stir functions in one, the processing capacity of 2~ 5kg, speed range of 100~ 8000rpm, manual lifting is simple and convenient, suitable for fluid material experiments.
Colorimetric digestion integrated tube operation, no liquid transfer; water samples for more than 10 measurements to take the average value; ammonia nitrogen detection limit of 0.01mg/L, measurement error ≤ +/- 5%, data storage 30,000.
The equipment adopts electronic constant force speed regulation, Speed range 100~ 8000rpm, maximum processing viscosity of 15000mPa.s, high-speed shearing and high-frequency mechanical effects to achieve efficient mixing and dispersion.
Colorimetric integrated tube design, no liquid transfer, measurement error ≤ +/- 5%, Repeatability ≤ +/- 5%, support more than 10 measurements to take the average, built-in 30,000 data storage and thermal printer.
Equipped with a 60mm diaMeter 304 stainless steel dispersion plate, it is corrosion-resistant and easy to clean; the lifting stroke is 11 to 42 centiMeters, which can be flexibly adapted to different containers; the handling capacity is up to 25 liters, meeting the needs of medium-scale experiments.
Rated load 1000N, Travel 100mm, manual operation is stable, can adapt to a variety of Force Gauge, suitable for tension and compression load and plug force test, horizontal structure for desktop installation.
Colorimetric integrated tube design, no need to transfer liquid, direct display of concentration value; support more than 10 measurements to take the average value, reduce the error; measurement error ≤ +/- 5%, Repeatability ≤ +/- %, Optical inspection Stability is excellent, data storage up to 30,000.
Colorimetric digestion integrated tube operation, no need to transfer liquid; Measurement range 0~ 20mg/L, detection of the lower limit of 0.01mg/L; multiple measurements of water samples and remove abnormal values, improve accuracy; with abnormal detection prompt function.
Standard Processing capacity 500-10000ml, suitable for HR series Disperser, suitable for efficient dispersion processing of large-volume samples.
The equipment uses an electronic constant force speed line, digital direct display Rotation speed, speed range of 100 to 8000rpm, maximum processing viscosity of 100000mPa.s, to adapt to different test needs, through high-speed shearing and high-frequency mechanical effects to achieve efficient mixing and dispersion.
Processing capacity 2~ 5kg, speed range 100~ 8000rpm, manual lifting operation is simple, suitable for fluid material experiments.
Processing capacity range of 100~ 5000ml, maximum processing viscosity of 5000CP, suitable for a variety of Disperser models, providing stable Sample Handling ability.
The Gamma ball volume replacement method is used to support 0.01-300 g weight range and 0.001g/cm ³ density accuracy, and the immersion depth of the liquid level can be adjusted arbitrarily and the air buoyancy error can be compensated.
