The multi-stage color development structure can simultaneously print 4 color strips of different thicknesses or Hue, and the uniform ink speed can be adjusted by 500-800rpm in three gears. With the Basis Weight instrument, the ink layer thickness is precisely controlled, and the operation is simple and durable.
Provide uniform ink speed three adjustable 450 to 800rpm, color development speed three adjustable 12 to 25rpm, color development pressure range -20 to 80, support ordinary or UV ink roller, improve work efficiency and applicability.
Using 160 * 280mm size, with wire Rod scraping ink to ensure that the film is flat, Glass table is conducive to operation and observation effect.
Using 15.5cm/min ink wiping speed, equipped with 0.1mm ink coating platen, the test process is precisely controlled by 4.3 inch Touchscreen, which can accurately determine the absorption capacity of the material to the inks vehicle.
With metal plating anilox roller and rubber roller, the number of anilox lines reaches 300 lines/inch, which can precisely control the film fineness, and the print width of 70mm is suitable for testing of various materials.
Automatic ink running stability, ink time and speed can be set, printing pressure 0~ 2mm adjustable, provide low, medium and high three printing speed, each time can be proofed 4 colors to facilitate Color contrast.
The ink wiping speed of the instrument is 15.5 +/- 25px/min, the ink absorption time is 120 +/- 5s, and the 4.3 color Touchscreen control can accurately evaluate the acceptance of inks and the absorption capacity of the vehicle.
Wet film thickness 137.2 μm, coating width 300 mm. The wire-wound structure enables the preparation of uniform coatings on both flat and easily raised substrates, while the two-end hand grip design facilitates even force distribution during operation.
The device can precisely control the film thickness of the ink layer of the color strip, and the ink injection amount is 0.0012g, which is used for ink contrast and color concentration detection.
The ink wiping speed is 15.5cm/min, the opening area of the ink coating platen is 20cm ², and the ink absorption time is 120s. The test process is automatically controlled to accurately determine the absorption capacity and penetration performance of the paper to inks.
It can simultaneously print color bars of different Colors or Ink Film thickness, detect inks Hue and Gloss, uniform ink time can be adjusted from 1 to 800 seconds, support dry and wet ink discoloration analysis and abrasion resistance testing.
The equipment supports 0-2MM pressure adjustment, providing three-speed printing speed (10/15/20 rpm) and uniform ink speed (650/800/1000rpm), which can imprint 2.5mm thick paper and 1mm plastic film to achieve precise uniform ink and stable operation.
Using 180 wire metal engraving roller to control the ink film thickness, four pyramidal mesh structure to ensure uniform Spreader, simple operation and easy cleaning, can quickly prepare samples similar to flexographic printing effect.
The ink wiping speed is 15.5 +/- 1.0cm/min, the opening area of the ink coating platen is 20 +/- 0.4cm ², and the ink absorption time is 120 +/- 5s. It is controlled by 4.3 inch color Touchscreen, which is suitable for the absorption performance measurement of paper inks.
Adopt automatic ink leveling system, ink leveling time adjustable, three-speed ink leveling speed 400-700rpm, printing speed 0-1000rpm frequency conversion adjustable, equipped with German imported rubber roller, support different materials substrate.
