The thickness of the pressurable steel plate Aluminum Panel is 0.2~ 1.5mm, the weight of the whole machine is 50kg, and the compact shape is only 300 * 300 * 190mm, which meets the NCCA standard T-Bend test method.
The equipment can perform a 45 ° bending test, support 0.5~ 1.0mm plate thickness, equipped with Travel ≥ 10mm flattening mechanism, suitable for accurate testing of coating flexibility.
The gear pair and crank lifting mechanism are used to achieve accurate bending, the first bending angle is less than 45 °, the flattening mechanism Travel ≥ 10mm, which can test 0.5-2 mm thickness plates and support OT to T bend test.
Equipped with seven steel shaft Rods of different diaMeters, the radius of curvature covers 0.5mm to 7.5mm, and the shaft Rod length is 50mm, which can accurately test the film flexibility under standard temperature Humidity conditions.
Equipped with two kinds of shaft Rods with diaMeters of 100mm and 50mm, it can simulate the actual stress conditions, and make the sample uniform bending and deformation through the rolling shaft, which is convenient for observing the phenomenon of film crazing and peeling.
The test bending angle is less than 45 degrees, suitable for steel plate thickness 0.5~ 1.0mm and Aluminum Panel thickness 0.5~ 2.0mm. The gear pair and crank lifting mechanism are used to achieve T-shaped bending, which is easy to operate.
Equipped with seven shafts of different diaMeters and a minimum radius of curvature of 0.5mm, the flexibility of the paint film can be accurately measured at 180 ° bending under standard temperature Humidity conditions.
Equipped with 7 different diaMeter shaft Rods, the length of the shaft Rod is 35mm, and the minimum radius of curvature is 0.5mm, which can accurately determine the film flexibility according to the standard requirements.
It can measure the ability of the paint film to deform with the substrate without damage. It is equipped with a shaft Rod with a diaMeter of 50mm and 100mm.
It can test the cracking of the paint film after bending 180 degrees in 1-3 seconds, and the diaMeter range of the shaft Rod is 2-32mm. It is suitable for the test plate with a thickness of not more than 1.0mm. Quick evaluation of flexibility.
Equipped with R25 and R50 two kinds of support film specifications, support 0.2-0 mm tinplate test plate substrate, through the rolling shaft uniform bending deformation, easy to observe the physical changes of the film.
The equipment can detect the crazing or peeling of the putty film after bending, equipped with R25 and R50 support film specifications, shaft Rod size is 50mm and 100mm in diaMeter, suitable for 0.2-0. 3mm thick tinplate plate.
Equipped with a total of 12 shaft Rods of 2-32mm, it can test the 1.0mm thickness sample, and test the anti-cracking performance of the coating through 180 ° bending, which is easy to operate and accurate.
Equipped with 13 kinds of diaMeter shaft Rods, covering the range of 2-32mm, can detect 1.0mm thickness samples, evaluate the film anti-cracking performance through different bending radii, easy and accurate operation.
Equipped with 13 shaft diaMeters from 2 to 32mm, it can accurately determine the cracking performance of coatings; support 1.0mm thickness sample testing, manual operation to ensure smooth and controllable bending process, meeting standard laboratory Environmental requirements.
