Frequency of 710 vibrations per minute, mixing in 30 seconds; can handle 0.5 to 20 liters of barrel paint, equipped with safety interlock and height adjustment functions, quiet operation and easy loading.
The use of low-speed intermittent barrel edge mixing, L-shaped paddle mixing design can be completed in five minutes uniform mixing, Speed range 0~ 60rpm, mixing process inks do not heat up, clean simple.
Mixing method of low speed intermittent sticking barrel edge, L-type paddle mixing design makes inks flip and cut, mixing evenly within five minutes without heating up, Speed range 0~ 60rpm, transmission mode is direct transmission to reduce power loss.
The device can quickly mix ground dispersed materials in a closed system, with a speed range of 1500-3500 rpm, a mixing capacity of 5-150G, and features bubble-free and quiet operation.
The non-contact mixing method is adopted to avoid sample contamination, the speed range is adjustable from 0 to 2800rpm, and various containers such as testtube beakers are supported. The mixing efficiency is dozens of times higher than that of manual mixing, and the mixing is uniform.
Elliptical trajectory vertical vibration design, vibration Frequency 660 times/min, maximum load 30KG, equipped with automatic cooling down system to maintain sample temperature stability, closed structure to reduce noise and pollution risk.
Adopt closed system design, mixing capacity 5-200G, Speed range 1500-3500rpm, can achieve fast and efficient Mix & disperse, the operation process is quiet, pollution-free and bubble-free, support manual and intelligent two control modes.
Made of stainless steel, the diaMeter of the slurry is 60mm, and the diaMeter of the Rod is 8mm. It is suitable for efficient mixing of medium and low viscosity liquids. The structure is simple and durable, and the mixing effect is uniform and stable.
Equipment Vibration Frequency 660 times/min, maximum load 30KG, elliptical trajectory movement to ensure that the sample test conditions independent equality, equipped with automatic chill down system to maintain temperature stability.
Mixing method of low speed intermittent sticking barrel edge, professional Impeller design, can be thoroughly stirred in 10 minutes without heating up, Speed range 0~ 50rpm adjustable, easy to replace stainless steel Mixing Tank.
Mixing method, L-shaped integral forming Impeller without screw hole easy to clean, Speed range 0~ 60rpm, direct drive to reduce power loss, can set the mixing time and equipped with moving pulley.
Vibration Frequency 660 times/min, maximum load 30KG, elliptical trajectory motion to ensure that the sample test conditions are independent and equal, equipped with automatic chill down system to maintain temperature stability.
Made of stainless steel, with a diaMeter of 60mm and a Rod length of 300mm, it is suitable for efficient mixing of medium and low viscosity liquids. Medium and high speed operation provides stable mixing effect.
With 45 °/0 ° illumination and D65 Measurement light source, viewing angle of 10 °, support for multiple Color model conversion, weight of only 45g for portability, quality control and complementary color suggestions.
Contains 1026 standard Colors, conforming to the National Standard for Architectural Color Representation Methods, displaying 6 color samples per page, suitable for architectural color selection and management.
