Wet film thickness 22.9 microns, diaMeter 9.52 mm, the forming Rod uses an extrusion process to process continuous grooves, with no wire breakage and easy cleaning; the wire-wound Rod is based on the traditional principle, and there are differences in coating amount.
The extrusion process ensures that the bar is unbroken and easy to clean, the film thickness is 45μm, the total length is 250mm, and the 304 stainless steel material is durable and reliable.
The wire-wound design ensures uniform coating application, with a wet film thickness of 109.7 microMeters and a coating width of up to 300 milliMeters, making it suitable for surface treatment on a variety of substrates.
Wire-wound structure, wet film thickness 4μm, diaMeter 12.7mm, total length 585mm, wire diaMeter 0.05mm, stainless steel material to ensure durability and precise coating control.
Using a wire-wound coating process, with a wet film thickness of 32.0 μm and a coating width of 300 mm, it is suitable for substrates prone to curling and convexity, enabling uniform wet film coating, with a wire diaMeter of 0.36 mm.
Support bar and Drawdown blade double coating method, suitable for high, medium and low viscosity materials; coating speed 1~ 300mm/s stepless adjustable, Blade Coating accuracy +/- 3μm; equipped with innovative clamshell magnetic Drawdown blade and simple bar installation, easy to clean and load; Heating and Vacuum chuck function to improve Spreader mass.
The wire-wound design allows for precise control of a 86.9-micron wet film thickness, utilizing durable stainless steel material, with a coating width of up to 300 milliMeters, making it suitable for high-precision coating preparation.
The wire-wound structure enables coating with a 171.5-micron thick film, while the stainless steel material ensures corrosion resistance and long-term durability. The 9.52mm diaMeter Rod body, combined with 1.91mm steel wire, ensures operational stability.
The precision drawing stainless steel wire winding process is used to form uniform grooves to control the Coating thickness, the wet film thickness reaches 120μm, and the application width is 220mm to ensure the accuracy and repeatability of the coating.
With bar and Drawdown blade two Spreader mode, using clamshell Drawdown blade head and new bar Installation method, easy to clean. Spreader speed and length can be freely adjusted, film thickness control accuracy is high, suitable for Glass, cardboard and other substrates.
Employing an extrusion production process, the coating thickness is 105 microns, the coating width reaches 300 mm, and the coating accuracy can achieve 0.5 microns, ensuring coating uniformity and high-precision control.
Using wire-wound process, wet film thickness 12 μ m, application width 220mm, through precision winding stainless steel wire to form a uniform groove, to achieve precise and controllable Coating thickness.
Drawdown blade and bar two coating methods, the accuracy of +/- 3μm; Drawdown blade clamshell and new bar installation design for easy cleaning, improve efficiency; support speed 1-300mm/s stepless speed and application length free adjustment; Vacuum chuck function is suitable for soft substrates such as films.
Wire-wound design, wet film thickness 118.9μm, diaMeter 9.5mm, stainless steel material, wear resistance and corrosion resistance, suitable for preparing specific film thickness wet-film.
Coating thickness is controlled by wire-wound structure, wet film thickness reaches 100μm, application width 420mm, uniform groove is formed by precision stainless steel wire winding to achieve repeability Spreader effect.
