The two-stage gravity overlap structure ensures accurate measurement, with a resolution of 0.001 lbf/in ², supports fully automatic release and real-time calibrating, and is suitable for internal bond strength testing of various sheet materials.
It can cut 140mmx25.4mm samples, sampling thickness ≤ 1mm, Operating temperature 20~ 40 ℃, suitable for auxiliary sampling of Internal Bond Strength test.
Measurement range 20~ 1000J/m2, resolution up to 0.01J/m2; Impact angle 90 °, can accurately test the internal bond strength, suitable for multi-layer paper quality control.
Measurement range 20~ 1000J/m ², resolution 0.1J/m ², with Touchscreen operation and thermal printing function, suitable for a variety of Cardboard Internal Bond Strength accurate determination.
Can measure 20~ 1000J/m ² Internal Bond Strength, resolution of 0.001lbf/in ², using 90 ° Impact Angle test principle, clamping force 0~ 40kg/cm ² adjustable.
Using 7.0 inch touch screen display and hydraulic viscose sample pressing technology, the pressure is automatically adjusted, the Test accuracy reaches 0.01J/m ², the whole machine has strong rigidity to reduce vibration energy loss, and is suitable for a variety of Cardboard interlayer bonding force detection.
Measurement range 20-1000J/m ², accuracy of +/- 1-2J/m ², support 25.4mm sample size and 0-40kg/cm ² adjustable clamping force, equipped with thermal printer and LCD display.
Using electric hydraulic pressurization device, eliminating manual labor; Measurement range 20~ 1000J/m ², resolution up to 0.01J/m ²; equipped with touch screen and thermal printer, testing is convenient and efficient.
Adopt S-type Tension Sensor to Ensure High Accuracy, Built-in Micro Hydraulic System, Support Strength and Force Measurement modes, Continuous Operating Time over 200 hours, Range 0~ 10KN.
The maximum pull-out force is 300kN, the central aperture is 45mm, and it adopts a hollow self-resetting hydraulic cylinder design. The reading can be directly read the tensile force value, and the service life is long and it is light to carry.
Range 10kN, accuracy ≤ +/- 1.0% F.S, using mechatronics design, weight only 2.8kg, handle operation labor-saving, can directly display the strength value and have automatic shutdown function.
Using pneumatic adhesive sample pressing and automatic release, the test range is 0-1000J/M ², the accuracy is 0.001J/M ², the Z-direction failure energy is measured by pendulum Impact measurement, and the structural rigidity is strong to reduce energy loss.
Range 0~ 6.000kN, accuracy ≤ +/- 1%, drawing Travel 10mm, compact structure can be continuously uniformly loaded, automatically maintain the peak bonding force, suitable for low bonding force detection.
Impact angle of 90 °, can test 5 groups of specimens at the same time, the minimum reading value is 0.005 kg-cm, the mechatronics design is compact, and meets the requirements of many international standards.
Tensile Strength and elongation paraMeters can be detected, test force 500-3000N optional, accuracy +/- 1%, stepless speed 1-500mm/min, suitable for all kinds of paper and Cardboard materials.
