With 6 sets of fixtures and 45 ° to 180 ° multi-angle adjustment ability, swing speed 10-60c.p.m. adjustable, automatic detection of disconnection and stop, load range 50-500g, improve Test accuracy and efficiency.
Adopting a stepper motor automatic positioning and electromagnetic release system, the swing period is 1.4 seconds, and the steel ball diaMeter is 5 mm, providing visual and acoustic test end signals.
Adopting double swing bar design, steel ball diaMeter 8mm, swing period 0.625s, automatic counting function, accurate measurement of film resilience changes, easy to operate.
With 10-60 times/min adjustable speed rate and 10 ° -360 ° adjustable angle, supports 6-station synchronous testing, simulates the bending tensile stress of the wire through reciprocating rocking, and evaluates durability.
Six-station synchronous test, angle range of 0- +/- 180 °, using photoelectric Sensor to collect signals, with automatic counting of conduction and automatic stop function of preset times to ensure accurate evaluation of cable folding strength.
Adopt all directions swing vibration mode to ensure that the paint is fully mixed, Vibration Frequency 550 times/min, equipped with 0-15 minute timing function, suitable for 80-240mm barrel height range.
The stepper motor is used to achieve fully automatic positioning, the electromagnetic system releases the swing Rod, the Persoz swing Rod cycle is 1 second, and the swing time on the flat Glass is 430 +/- 15 seconds. There are visual and acoustic signals at the end of the test.
Using 500g swing Rod mass and 8mm steel ball diaMeter, automatic counting function can accurately measure coating surface Hardness, swing cycle of 1 second to achieve efficient testing.
Using wire-wound stainless steel wire structure, the film thickness is 100 microns, the total length is 375mm, and the application width is 255mm to ensure that the Spreader is uniform and firm, suitable for precision experimental operation.
Konig and Persoz swing bars are used, Konig swing period is 1.4s, Persoz swing period is 1s, and the number of swing angles is automatically recorded, which is suitable for accurate determination of paint film Hardness.
Wire-wound design wet film thickness 11.4μm, wire diaMeter Φ 0.13mm, not easy to block and easy to clean, suitable for a variety of substrates, to achieve uniform Spreader and flexible thickness adjustment.
Measurement range 10~ 500mN, resolution 5mN, tear arm 104mm, paper size 25 * 15mm, suitable for accurate determination of paper Tear strength.
Wire-wound design wet film thickness 9.1 μ m, steel wire diaMeter Φ 0.10mm, chrome-plated surface is easy to clean and prolong life, suitable for a variety of substrates, Spreader uniform and flexible.
Suitable for diaMeter 0.1 to 4mm wire, Measurement range 0.03-50 microns, resolution 0.01 microns, equipped with thermal printer and quick installation fixed table, easy and accurate operation.
Support 2-wire method and 3-wire method measurement, Ground Voltage Measurement range 0~ 200V, Ground Resistance Measurement range 0~ 199.9 Ω, Response Time about 5 seconds, with continuous measurement function and overload protection, suitable for a variety of grounding system testing.
