The equipment adopts an electric lifting platform and variable frequency speed regulation, with a maximum Vacuum Level of -0.095Mpa to ensure efficient mixing of materials in a vacuum environment; the core component is SUS304 stainless steel, which is durable and easy to clean, and the compact design is suitable for a variety of application scenarios.
Rotation speed 0-1500rpm, Vacuum Level up to -0.9mpa, using hydraulic lifting and closed barrel lid design to avoid solvent volatilization, with sight glasses and searchlights to observe the stirring state in real time, support non-standard customization.
The rectangular vacuum Chamber improves space utilization, Vacuum Level up to 133Pa, is equipped with double-decked tempered Glass doors for easy observation, supports program control of heating and vacuum holding time, and improves processing conformity.
The built-in vacuum pump realizes 0~ -80kPa Vacuum Level, the fully transparent vacuum Chamber can hold 12 samples, the program control supports 80 sets of paraMeter storage, and the vacuum cycle operation is automatically completed.
The equipment operates under vacuum or pressure conditions, with a processing viscosity of 10000MPas, Operating temperature of 170 ° C, equipped with anchor type screw scraping wall stirring slurry and high shear homogeneous Mulser, supporting Multi-ParaMeter measurement such as material temperature and pressure.
Vacuum chuck area of 300 * 400mm, equipped with 150W vacuum pump, aperture 0.8mm to ensure uniform adsorption, improve Spreader accuracy and Stability.
The effective volume utilization rate of rectangular vacuum Chamber is high, each layer can be independently heated and vacuumed to inject nitrogen without interfering with each other, the temperature control accuracy is +/- 1 ℃, the Vacuum Level is 133Pa, and the double-decked tempered Glass door is easy to observe.
With programmed vacuum cycle control, the maximum number of cycles is 99 times, and the drying time is shortened by more than 50% compared with the traditional method; equipped with a digital vacuum Gauge, the control accuracy is +/- 1% to ensure a stable vacuum environment.
Coating speed 1~ 300mm/s stepless speed regulation, meyer Rod coating accuracy +/- 0.001mm, support heating temperature to 180 ℃, Vacuum chuck fixed substrate, Touchscreen control is easy to operate.
The rectangular vacuum Chamber improves space utilization, the stainless steel studio is durable and easy to clean, the Vacuum Level 133Pa ensures efficient handling, double-decked tempered Glass doors are easy to observe, and over-temperature protection enhances safety.
Adopt bar coating method, coating speed 1~ 300mm/s stepless speed regulation, film thickness control accuracy of +/- 0.001mm, equipped with Vacuum chuck and heating function, support Spreader length and speed free adjustment, suitable for a variety of substrate coating.
With programmed vacuum cycle control, it can set the range of 50~ 900Pa Vacuum Level, and the drying time is shortened by more than 50%; it adopts digital vacuum Meter automatic control, accuracy +/- 1%, and supports 7 groups of 63-step temperature programming.
1Mm Vacuum aperture diameter and 18mm hole spacing design, equipped with 176 adsorption holes to ensure that the substrate is flat and fixed, with 150W vacuum pump to achieve stable adsorption effect.
The rectangular vacuum Chamber improves space utilization, the stainless steel studio is easy to clean, the Vacuum Level is 133Pa, the double-decked tempered Glass door is easy to observe, and the optional program control ensures stoving conformity.
Double-decked independent heating and vacuuming do not interfere with each other, Vacuum Level up to 133Pa, rectangular vacuum Chamber improves space utilization, resilience silicone rubber door seal ensures high vacuum, over-temperature protection improves safety.
