CATEGORIES

    Laboratory Ultrasonic Cleaning Bath

    Overview Products Knowledge Standards Terms
    The laboratory ultrasonic cleaner generates tiny bubbles in the liquid through high-frequency vibrations. When these bubbles burst, they produce shockwaves that strip away dirt and stains from the surface of objects. It is used to clean irregularly shaped items such as laboratory glassware and mechanical parts, effectively removing contaminants like grease, dust, and other residues.
    Selection
    When selecting, consider matching the tank capacity to the size of the items, observe the power density value, and choose stainless steel for better durability. Pay attention to the frequency parameter—40kHz is suitable for routine cleaning, while higher frequencies are used for precision devices. Check for temperature control and anti-corrosion design, and choose heating or timing functions as needed.
    capacity
    Ultrasonic frequency

    Terms

    Laboratory ultrasonic cleaner

    Standards

    Active GB/T 37361-2019
    Determination of the film thickness—Ultrasonic thickness gauge method

    Instruments

    DKSONIC E-60 Ultrasonic Cleaner Intelligent Mechanical Ultrasonic Degassing Cleaning Mode
    DKSONIC E-60 Ultrasonic Cleaner Intelligent Mechanical Ultrasonic Degassing Cleaning Mode

    With ultrasonic and degassing two cleaning modes, support 14 temperature within 80 ℃ precise control and 60 minutes timing. SUS304 stainless steel punching Tank without solder joint design, the transducer conversion rate is high, long service life.

    $ 251.00
    DKSONIC PS-60A Ultrasonic Cleaner 15L large capacity 40KHz heating cleaning
    DKSONIC PS-60A Ultrasonic Cleaner 15L large capacity 40KHz heating cleaning

    Equipped with 40KHz Ultrasonic Frequency and 400W Heating power, support 1-99 minutes timing and room temperature to 80 ℃ temperature control, inner Tank size 330 * 300 * 150mm, to achieve efficient and uniform cleaning.

    $ 228.00
    DKSONIC PS-10 Ultrasonic Cleaner 2L Capacity 40KHz Frequency heating cleaning
    DKSONIC PS-10 Ultrasonic Cleaner 2L Capacity 40KHz Frequency heating cleaning

    Equipped with 40KHz Ultrasonic Frequency and 100W Heating power, it supports 1-30 minute timing and 20-80 ℃ temperature control to ensure deep cleaning and rapid dirt removal.

    $ 121.00
    DKSONIC 1040W Ultrasonic Cleaner Industrial Grade 2000W Power 140L Large Capacity Dual Frequency Cleaning
    DKSONIC 1040W Ultrasonic Cleaner Industrial Grade 2000W Power 140L Large Capacity Dual Frequency Cleaning

    Ultrasonic Power up to 2000W, equipped with 40 high-quality vibrators, support 40KHZ/28KHZ dual-frequency switching, with 6000W heating system and 140L stainless steel inner tank to meet batch cleaning needs.

    $ 1284.00
    DKSONIC DK-3000FTS Ultrasonic Cleaner Multi-function cleaning machine, stainless steel inner Tank 28/40/68 KHz
    DKSONIC DK-3000FTS Ultrasonic Cleaner Multi-function cleaning machine, stainless steel inner Tank 28/40/68 KHz

    The equipment has 28/40/68 KHz ultrasonic frequency and 0-100 ℃ Temperature range, supports various working modes such as degassing and pulse, and the power-off memory function ensures the continuity of operation, which is suitable for cleaning complex parts.

    $ 961.00
    DKSONIC PS-20 Ultrasonic Cleaner 3.2L Capacity 40KHz Frequency heating cleaning
    DKSONIC PS-20 Ultrasonic Cleaner 3.2L Capacity 40KHz Frequency heating cleaning

    Equipped with 40KHz Ultrasonic Frequency and 100W Heating power, support 1-30 minutes timing and 20-80 ℃ temperature control, inner Tank size 240 × 140 × 10mm, improve cleaning efficiency.

    $ 146.00
    DKSONIC E-100 Ultrasonic Cleaner
    DKSONIC E-100 Ultrasonic Cleaner

    It is equipped with ultrasonic and degassing cleaning modes, supports accurate temperature control within 80 ° C and 60-minute timing, and is designed with SUS304 stainless steel punching Tank without solder joints. The transducer has high conversion rate and ultrasonic power of 600W.

    $ 315.00
    DKSONIC PS-20T Ultrasonic Cleaner 3.2L Capacity 40KHz Frequency
    DKSONIC PS-20T Ultrasonic Cleaner 3.2L Capacity 40KHz Frequency

    Equipped with 40KHz Ultrasonic Frequency and 3.2L cleaning capacity, it supports 1-30 minutes of regular cleaning, and can handle longer items in sections. The cleaning solution has obvious enhancement effect.

    $ 143.00
    DKSONIC PS-30 Ultrasonic Cleaner 6.5L Capacity 40KHz Ultrasonic Frequency
    DKSONIC PS-30 Ultrasonic Cleaner 6.5L Capacity 40KHz Ultrasonic Frequency

    The device uses 40KHz Ultrasonic Frequency, is equipped with 300W Heating power, supports 1-30 minute timing and 20-80 ℃ temperature regulation, ensuring deep cleaning and rapid dissolving of dirt.

    $ 190.00
    DKSONIC PS-100T Ultrasonic Cleaner 30L Large Capacity 40KHz Frequency
    DKSONIC PS-100T Ultrasonic Cleaner 30L Large Capacity 40KHz Frequency

    Equipped with 40KHz Ultrasonic Frequency and 30L large capacity Tank body, it supports 1-30 minutes regular cleaning, suitable for a variety of dirt treatment, easy to operate and significant cleaning effect.

    $ 296.00
    DKSONIC E-20 Ultrasonic Cleaner Ultrasonic degassing mode intelligent display
    DKSONIC E-20 Ultrasonic Cleaner Ultrasonic degassing mode intelligent display

    With ultrasonic and degassing dual cleaning mode, it supports accurate temperature control within 80 ° C and 60-minute timing. It adopts stainless steel punching Tank without solder joint design, resulting in high transducer conversion rate and long service life.

    $ 140.00
    DKSONIC PS-10T Ultrasonic Cleaner 2L Capacity 40KHz Frequency 1-30 minutes Timing
    DKSONIC PS-10T Ultrasonic Cleaner 2L Capacity 40KHz Frequency 1-30 minutes Timing

    40KHz Ultrasonic Frequency ensures cleaning effect, 2L capacity meets conventional needs, 1-30 minute timing function flexibly controls cleaning time, easy and safe operation.

    $ 119.00
    DKSONIC PS-40T Ultrasonic Cleaner 10L Capacity 40KHz Frequency
    DKSONIC PS-40T Ultrasonic Cleaner 10L Capacity 40KHz Frequency

    Equipped with 40KHz Ultrasonic Frequency and 10L cleaning capacity, support 1-30 minutes timing, suitable for a variety of dirt cleaning, easy to operate and cleaning effect is remarkable.

    $ 202.00
    DKSONIC PS-100 Ultrasonic Cleaner 30L Capacity 40KHz Frequency
    DKSONIC PS-100 Ultrasonic Cleaner 30L Capacity 40KHz Frequency

    40KHz Ultrasonic Frequency and 500W Heating power, 1-30 minute timing and 20-80 ℃ Temperature range, suitable for a variety of dirt cleaning needs.

    $ 315.00
    DKSONIC E-80 Ultrasonic Cleaner Intelligent mechanical ultrasonic degassing mode 14 temperature settings within 80 ° C
    DKSONIC E-80 Ultrasonic Cleaner Intelligent mechanical ultrasonic degassing mode 14 temperature settings within 80 ° C

    With ultrasonic and degassing cleaning modes, it supports 14 accurate temperature settings within 80 ° C and 13 time options within 60 minutes. It uses SUS304 stainless steel Tank and high-efficiency transducer for high conversion rate and durability.

    $ 299.00

    Articles

    Ultrasonic Thickness Gauge Selection: Technical Considerations for Probe Configuration and Measurement Modes
    This article primarily introduces the technical factors to consider when selecting an ultrasonic thickness gauge. In terms of probe configuration, the frequency affects both resolution and penetration depth, while crystal size determines adaptability to curvature and surface conditions. Dual-element probes offer a smaller dead zone compared to single-element probes, and delay-line probes are suitable for thin-wall and high-temperature applications.
    Ultrasonic thickness gauge for detecting thick coatings and composite coatings.
    Ultrasonic thickness gauges measure coating thickness using the principle of ultrasonic pulse reflection, calculating the result based on the propagation time of sound waves in the material and the speed of sound. When detecting thick coatings and composite coatings, challenges such as acoustic attenuation of the material, unknown sound speed, and signal recognition at multi-layer interfaces must be addressed.
    Ultrasonic Thickness Gauge Measures the Thickness of Flexible Packaging Materials
    This article introduces the principles, technical points, and operational procedures for measuring the thickness of flexible packaging materials using an ultrasonic thickness gauge. It is based on the principle of ultrasonic pulse reflection, which calculates thickness by measuring the propagation time of sound waves through the material.
    The principle of measuring dry film thickness with a coating thickness gauge
    Coating thickness gauges measure dry film thickness through non-destructive methods, with commonly used principles including electromagnetic induction, eddy current, and ultrasonic methods.
    To determine if an ultrasonic cleaner cleans effectively, first understand the two key parameters: frequency and power.
    This article mainly discusses how to achieve thorough cleaning with an ultrasonic cleaner, emphasizing that the key factors are frequency and power. The frequency determines the size and penetrating ability of the bubbles generated during cleaning, while the power provides the necessary energy for the cleaning process.