Film thickness 96.0μm, bar diaMeter 9.5mm, formed pRoduction process, application width of 300mm, accuracy up to 0.1μm, suitable for a variety of inks scraping color.
Using 180 * 480mm size, with wire Rod or Film Applicator scraping ink, is conducive to the film flat and effective, improve film mass.
The printing pressure can be adjusted accurately according to the thickness of the material, and the printing speed can be adjusted. It provides 4 primary color areas and 4 light color areas to ensure that the pattern is clear and tidy.
Using 160 * 280mm size, with wire Rod scraping ink to ensure that the film is flat, Glass table is conducive to operation and observation effect.
Made of wear-resistant stainless steel, the service life is more than 6 months. The wet film thickness is 43.4 μm, the film accuracy is 0.1 μm, and three diaMeters of 6.35mm, 9.52mm and 12.7mm are provided to ensure the consistent film effect.
Glass material is conducive to film flatness, size 230 * 340mm, with wire Rod or Film Applicator for scraping operation is more effective.
Formed pRoduction process to ensure uniform film, wet film thickness 82.3 μ m precise control, stainless steel wear-resistant and durable, application width 300mm to meet a variety of experimental needs.
Using formed pRoduction process, wet film thickness 34.3μm, application width 300mm, stainless steel material is durable and easy to clean, suitable for a variety of inks scraping applications.
Using thermal printing technology, it is designed for use with testing instruments. It can directly connect the color difference Meter and Glossmeter to achieve real-time output of measurement data and report generation.
Using the formed pRoduction process, Coating Weight is about twice that of the wire-wound coating Rod, wet film thickness is 13μm, film accuracy reaches 0.5 μm, and the material is 304 stainless steel.
Adopt servo electric printing pressure system, printing pressure 0-4mm automatic adjustment, printing speed 0-100 Meters can be set, support low accuracy overprint, simulate Gravure Printing drawdown blade Installation method, easy to detect inks.
The wear-resistant stainless steel material is durable, and the wire-wound structure can precisely control the 43.4 μm wet film thickness. It is suitable for soft material scratch sample preparation. Spreader width reaches 300mm.
The equipment adopts scraping method, coating speed 1~ 10m/min, thickness range 0.005-3mm, equipped with automatic deviation correction and tension control to ensure uniform and stable Spreader.
The equipment supports 0-2MM pressure adjustment, providing three-speed printing speed (10/15/20 rpm) and uniform ink speed (650/800/1000rpm), which can imprint 2.5mm thick paper and 1mm plastic film to achieve precise uniform ink and stable operation.
Wet film thickness 45μm, main Rod diaMeter 10mm, effective application width 600mm, using SUS304 material, Coating Weight, length and surface preparation can be customized, suitable for a variety of Spreader conditions.
