Adopt arc reciprocating motion mode, provide four adjustable speeds (21-106rpm) and 2lb/4lb friction load, support 0-999999 automatic shutdown tests, suitable for Abrasion Resistance evaluation.
Using reciprocating motion to simulate transportation abrasion, Friction Frequency 0~ 2.5Hz adjustable, Test Travel 12.7~ 50.8mm, support continuous test 0~ 24 hours, suitable for a variety of can sizes and pressure conditions.
The equipment adopts reciprocating friction method, load range 0~ 3kg, Frequency 60 +/- 1cpm, Test Travel 90mm, no need to chill down liquid, no more dust, easy to operate.
Adopt reciprocating friction method, Friction Frequency 0~ 2.5Hz, Test Travel 12.7~ 50.8mm, can simulate coating abrasion during transportation, support continuous test 0~ 24 hours.
With four adjustable friction Frequency 21/43/85/106cpm, friction load 20N, support linear reciprocating friction movement, power-off memory function to ensure that paraMeters are not lost, effective analysis of coating adhesion and wear resistance performance.
Can test inks multi-directional adhesion at the same time, Friction Frequency 43cpm, Friction Load 2lb/4lb, Abrasion Resistance evaluation by measurement density or Coating thickness reduction, support 0-99999 automatic shutdown.
Scruf Travel 20-300mm adjustable, speed range 1-60cpm, equipped with TFT full color display and intelligent Operating interface, supports manual testing and is compatible with a variety of standard accessories, suitable for coating Abrasion Resistance evaluation.
Using reciprocating friction method, friction load 500g, Friction Frequency 40 +/- 2 times/minute, can simulate drying or wet conditions for material wear-resistant decolorization test.
Temperature Fluctuation is controlled at +/- 0.1 ℃, Oscillation Frequency is 0~ 300rpm, support cyclotron and reciprocating oscillation, reasonable structure and simple operation, suitable for fostering a variety of fluid solid compounds.
With two oscillation modes of rotary and reciprocating, Oscillation Frequency 0~ 300rpm, temperature control accuracy +/- 1 ℃, support timing function, to meet various experimental needs.
Adopt reciprocating friction mode, friction load can be selected 2lb or 4lb, friction Travel 60mm, support 0-999999 automatic shutdown, LED display is easy to operate.
Measurement range 0~ 1250μm, suitable for LEEB220 and LEEB222 Coating thickness Gauge, Abrasion Resistance is good, suitable for a variety of nonmagnetic Coating thickness detection.
Temperature control accuracy of +/- 0.1 ℃, Oscillation Frequency Range start to 320rpm, support reciprocating oscillation mode, spring bottle rack adapts to a variety of comparison tests, easy to operate, safe and smooth operation.
With 20mm pendulum amplitude and 300rpm Oscillation Frequency, support reciprocating oscillation and stainless steel spring universal fixture, can be adapted to a variety of test bottles for uniform mixing operation.
Using standard sand free fall brushing layer, straight grinding to expose 4mm substrate; can quantify the abrasion per unit thickness of the paint layer of sand volume, the inner diaMeter of the catheter 19mm, sample holder 45 degrees angle fixed.
