With Φ 4mm and Φ 8mm dual measurement caliber, Repeatability Delta E * ab < 0.06, can store 100 sets of master standards, Measurement time only 0.5 seconds, support sub-color difference display and Color bias analysis function.
The 14mm large diaMeter design is suitable for texture and particle surface measurement, using 8/d Optical inspection geometry to ensure accurate data, Repeatability Standard Deviation Delta E * ab ≤ 0.08, supports a variety of chroma space and Color difference formula.
Adopt 8mm measurement diaMeter, Repeatability Delta E * ab < 0.05, equipped with TFT true color display, support a variety of Measurement light sources and Color difference formula, suitable for a variety of material surface color detection.
Optical inspection system with infinity, semi-retouching color difference objective and phase contrast condenser provides 40X-1000X magnification for viewing thicker samples and enhancing the three-dimensional profile of cell structure.
Optical inspection system and Modular design, equipped with flat-field color difference elimination fluorescent objective, fretting grid value of 2 μ m, support multi-band fluorescent filter group, comfortable operation.
Optical inspection grade quartz containers for measurement of liquids, slurries, powders and fine particles simplify the Sample Handling process and improve measurement efficiency.
Using 45 °/0 ° illumination, Repeatability Standard Deviation ≤ E * ab ≤ 0.08, can store 1500 sets of data, support a variety of Color difference formulas and four Available Light Sources to meet different measurement needs.
45 °/0 ° Optical inspection geometry, the measurement results are consistent with visual inspection; 8mm measurement diaMeter, Repeatability Delta E * ab within 0.08; built-in whiteboard paraMeters do not need each calibration, dual positioning technology to improve measurement accuracy.
Optical inspection system with infinite distance, equipped with flat-field color difference eliminating fluorescent objective, fretting grid value of 2 μ m, coarse fretting coaxial focusing, support for a variety of fluorescent filter sets, suitable for low-illumination microscopic image shooting.
Adopt Φ 4mm measurement aperture and full Light spectrum LED Illuminant, chromatic value Repeatability Delta E * ab 0.05, support cloud color database and a variety of Color difference formula calculation, portable design with dust cover and long battery life.
Optical inspection system with infinity and Modular function design, equipped with flat-field color difference-cancelling fluorescent objective, with a fretting grid value of 2 μm, supports a variety of excitation bands of fluorescent filter sets to meet the needs of scientific research and observation.
Adopt 8 °/d illumination mode and Φ 4mm measurement diaMeter, chromatic value Repeatability Delta E * ab within 0.1, with Automatic calibration and moving Color Chart database function, support a variety of Color difference formula and Illuminant simulation.
Equipped with eight Illuminants and three measurement diaMeters, the repeability accuracy reaches 0.05, supports a variety of Color difference formulas and display modes, built-in whiteboard automatic correction, suitable for irregular surface and small area measurement.
Adopt 45/0 illumination light receiving system, 8mm measurement aperture, support single and average Measurement mode, Repeatability Standard Deviation ≤ E * within 0.1, can carry out color difference contrast analysis and color quality control.
Measurement paraMeters can be continuously printed without connecting to a computer, and a variety of color difference Meter models are supported, which is convenient for on-site data storage and recording.
