The eddy Current principle is used for measurement of nonconductive coatings on non-ferrous metal substrates, with a thickness range of 0~ 625μm and an error of +/- 3%. It has IP65 Protection Rating and fast measurement capabilities of more than 60 readings per minute.
Using eddy current sensing principle and probe probe design, especially suitable for small size and profiled material measurement; Measurement range 0-1500 μm, resolution up to 0.1 μm, repeatability error ≤ +/- （ 0.8% reading + 0.1 μm), support multi-point calibrating and data statistics function.
Using eddy Current thickness measurement principle, Measurement range 0-1000μm, resolution 0.1μm, minimum measurable convex curvature 3mm, with automatic shutdown and low voltage prompt function.
Equipped with round water Bath cover and aluminum Cup body, flow hole diaMeter 5.6mm, capacity 50ml, in line with GB/T1723 standard, suitable for viscosity measurement.
Using magnetic Induction and eddy current double thickness measurement method, Measurement range 0-1250μm, error +/- 3%, automatic identification of iron and non-iron matrix, with statistical function and undervoltage indication, easy to operate.
Using magnetic Induction and eddy Current dual principle, Measurement range 0-3000μm, accuracy +/- 3%, automatically identify the matrix material, no need to calibrate only zero, easy to carry and lightweight.
Eddy current induction technology to ensure good Repeatability and accuracy, support six kinds of Hardness standard automatic switching, single charge can be continuous measurement of more than 5000 times, thickness Measurement range 0.6mm-8mm.
Using magnetic Induction and eddy Current dual technology, Measurement range 0-1500μm, accuracy +/- 2%, Probe wear resistance more than 500,000 times, support single point and multi-point calibrating, suitable for various environments.
Using magnetic Induction and eddy Current Dual Measuring method, Measurement range 0~ 3000μm, accuracy +/- 2%, Probe wear resistance more than 500,000 times, Measurement speed of 0.3 seconds/time, suitable for various matrix materials.
Using magnetic Induction and eddy Current dual principle, Measurement range 0~ 1250μm, Probe with line can measure grooves and complex positions, automatically identify iron and non-iron substrates, with single point and two point Adjustment.
Using eddy Current Measurement principle, Measurement range 0~ 1250μm, with continuous single double Measurement mode, metal shell anti-interference, support automatic statistics and storage of 1560 measured values.
Using magnetic Induction and eddy Current principle, Measurement range 0~ 1250μm, resolution up to 0.1μm, equipped with wear-resistant hard metal probe and spring guide sleeve Probe, support automatic memory calibrating and RS232C communication.
Using magnetic Induction and eddy Current principle, Measurement range 0~ 500um, resolution 0.1μm, wear-resistant hard metal probe and Automatic calibration function, support single and continuous Measurement mode.
Using magnetic Induction and eddy Current dual principle, Measurement range 0-1500 μm, with temperature compensation function, support continuous fast and High Accuracy Measurement mode, can store 500 sets of data and automatically filtrate outliers.
Using magnetic Induction and eddy Current dual principle, Measurement range 0-2000μm, resolution up to 0.1μm, with automatic identification of substrate function and Data storage ability, support surface measurement minimum convex 1.5mm.
