The sampling length can reach 300mm, the sampling width error is +/- 0.1mm, and the notch parallelism is less than or equal to 0.1mm. It is suitable for accurate sampling of materials such as paper Cardboard.
Constant pressure ensures uniform sampling, suitable for a variety of powder material testing, implementation of GB9087-88 and other standards, improve sampling accuracy and conformity.
Adopt stamping sampling method, equipped with special 18 steel knife edge more durable, sampling area of 100cm ², sample thickness range of 0.1-1 mm, suitable for standard sample preparation.
The stamping sampling method is accurate and convenient, the quenching tool is resistant to abrasion, the sampling error is +/- 0.2mm, the sampling thickness range is 0.1-1 mm, and the special treatment blade can be used normally for 10 years.
The Spin Coater is controlled by touch screen, the acceleration range is 100~ 4000rpm/s, and the speed can be automatically corrected by A/K selection. The motor torque is large and the operation is smooth, which is suitable for the assembly line process.
The stamping sampling structure is simple and firm, the knife edge is quenched, the sampling is labor-saving and accurate without burrs, the sampling thickness range is 0.1~ 1.0mm, and the sampling size error is 125mm +/- 0.2mm.
Using the isokinetic sampling theory, the wind speed of the sampling head is consistent with the air speed of the clean room. Sampling flow rate is 100L/min, which can work continuously for 10 hours. All 316 stainless steel materials ensure the accuracy and durability of collection.
Thrust sampling mode, cutting edge pressure sample 25mmx100mm and gluing sample 25mmx80mm, sampling thickness range of 18mm, suitable for Corrugated Board and carton mass detection.
Sampling flow rate of 100L/min, sampling range of 100~ 6000L, aviation aluminum material easy to sterilize disinfection, suitable for clean room isokinetic sampling, weight only 2.5Kg portable design.
The sampling area is 100cm ², the sampling thickness range is 0.1-1 mm, and the sampling error is +/- 0.35cm ². It is suitable for paper Basis Weight determination and sheet burst resistance test standard sample sampling.
The paint film adhesion was measured by the circular trace method, the drawing diaMeter was 0~ 10.5mm, and the Working Travel was 80mm. The integrity of the paint film was evaluated according to seven grades, and the operation was simple and reliable.
The punching sampling method ensures accuracy, the sampling size error is controlled within 0.1mm, and two specifications of 70 * 38mm stiffness and 36 * 38mm crease stiffness are supported.
Stamping type sampling structure, sampling length accuracy +/- 0.2mm, width accuracy +/- 0.1mm, suitable for 0.1~ 1.0mm thickness materials, sampling both sides of the parallelism is less than 0.015mm.
It adopts wear-resistant inks and thickened steel knife design, is equipped with paper cutting guide ruler and paper pressing anti-skid function, and the sampling size is 380 * 300mm to ensure accurate sampling and stable operation.
It can measure the ability of the paint film to deform with the substrate without damage. It is equipped with a shaft Rod with a diaMeter of 50mm and 100mm.
