Using 15.5cm/min ink wiping speed, equipped with 0.1mm ink coating platen, the test process is precisely controlled by 4.3 inch Touchscreen, which can accurately determine the absorption capacity of the material to the inks vehicle.
Automatic ink running stability, ink time and speed can be set, printing pressure 0~ 2mm adjustable, provide low, medium and high three printing speed, each time can be proofed 4 colors to facilitate Color contrast.
The ink wiping speed of the instrument is 15.5 +/- 25px/min, the ink absorption time is 120 +/- 5s, and the 4.3 color Touchscreen control can accurately evaluate the acceptance of inks and the absorption capacity of the vehicle.
The device can precisely control the film thickness of the ink layer of the color strip, and the ink injection amount is 0.0012g, which is used for ink contrast and color concentration detection.
The ink wiping speed is 15.5cm/min, the opening area of the ink coating platen is 20cm ², and the ink absorption time is 120s. The test process is automatically controlled to accurately determine the absorption capacity and penetration performance of the paper to inks.
It can simultaneously print color bars of different Colors or Ink Film thickness, detect inks Hue and Gloss, uniform ink time can be adjusted from 1 to 800 seconds, support dry and wet ink discoloration analysis and abrasion resistance testing.
The equipment supports 0-2MM pressure adjustment, providing three-speed printing speed (10/15/20 rpm) and uniform ink speed (650/800/1000rpm), which can imprint 2.5mm thick paper and 1mm plastic film to achieve precise uniform ink and stable operation.
Using stainless steel material, range 0~ 300μm, Graduation 15μm, wheel structure with dial, by comparing Coating adsorption quickly read Film thickness, to ensure the construction mass.
Using stainless steel material, range 0~ 50μm, Graduation 2μm, wheel structure with dial, by comparing the scale and Coating adsorption quickly evaluate the wet film thickness to ensure the construction mass.
Made of stainless steel, range 0~ 100μm, Graduation 5μm, wheel structure with dial, can quickly and accurately read the wet film thickness, to ensure the construction mass of Coating.
Using stainless steel material, range 0~ 2000μm, Graduation 100μm, wheel structure with dial, by comparing the scale and Coating adsorption quickly evaluate the wet film thickness to ensure the construction mass.
Made of stainless steel, range 0-1000 μm, Graduation 50 μm, wheel structure with dial, can quickly and accurately read the wet film thickness, suitable for a variety of Coating application scenarios.
Made of stainless steel, range 0~ 200μm, Graduation 10μm, wheel structure with dial, rapid and accurate evaluation of wet film thickness by comparing Coating adsorption, easy to operate.
The ink wiping speed is 15.5 +/- 1.0cm/min, the opening area of the ink coating platen is 20 +/- 0.4cm ², and the ink absorption time is 120 +/- 5s. It is controlled by 4.3 inch color Touchscreen, which is suitable for the absorption performance measurement of paper inks.
Adopt automatic ink leveling system, ink leveling time adjustable, three-speed ink leveling speed 400-700rpm, printing speed 0-1000rpm frequency conversion adjustable, equipped with German imported rubber roller, support different materials substrate.
