The blade width is 100mm and the height is 60mm, and the Rod length is 300mm, generating tangential flow and high shear rate to prevent medium deposition, making it suitable for low-speed stirring.
When stirring, a tangential flow is generated, and a high shear rate is formed at the edge to prevent medium deposition. The blade width is 100mm and the height is 60mm, and the Rod diaMeter is 8mm, which is suitable for low-speed and mild stirring.
The use of low-speed intermittent barrel edge stirring, mixing inks evenly within five minutes without heating up, Speed range 0~ 60rpm, L-type paddle stirring design is clean and simple, direct transmission to reduce power loss.
The equipment set stirring, sand grinding, dispersing functions in one, using Minbu motor to achieve 0-2800rpm speed regulation, lift Travel 250mm, with small size, low noise and no carbon brush abrasion characteristics.
Adopt high-performance motor to run smoothly and with low noise, support 0-1500rpm stepless speed regulation, Processing capacity 10-70L, with hand lift and explosion-proof design, suitable for a variety of stirring forms.
Adopt dual-axis constant force lifting system, lifting Travel 400mm; Rotation speed up to 8000rpm, linear speed up to 41m/s; High-speed dispersion disc generates strong shear force to achieve uniform dispersion and suspension effect of materials.
Using frequency conversion control to achieve a wide range of 60~ 8000rpm speed regulation, the maximum processing viscosity of 100000mPa.s, set dispersed ground stirring function in one, through high-speed swirl/spin to pRoduce a strong shear effect to improve the mixing efficiency.
The maximum processing viscosity is 100000mPa.s, the speed range is 60~ 8000rpm, and the three functions of dispersion, grinding and stirring are integrated. Rotation speed and low noise operation are realized by frequency conversion control.
Low-speed running torque output of 94N.cm, using multi-stage Non-metallic gear transmission force, stable running state and low noise, stepless speed range of 100~ 1400rpm, suitable for a variety of Impeller and containers.
High-performance motor running smooth and low noise, with CPU digital display dynamic Rotation speed control, can realize timing fixed speed operation, Processing capacity 10-100L, lifting Travel 600mm, support a variety of mixing forms simple replacement.
Rotation speed stable and no temperature rise, Max. stirring Capacity 3L, Speed range 0~ 1500rpm, suitable for small capacity single stirring needs.
Maximum stirring capacity 2 liters, Speed range 100 to 2000 rpm, Compact structure suitable for small capacity stirring, Continuous Operating Mode to ensure stable operation.
Using frequency conversion control to achieve a wide range of 60~ 8000rpm speed regulation, the maximum processing viscosity of 100000mPa.s, set of dispersion, grinding, stirring three functions in one, the spring lifting structure is easy to operate.
Adopt frequency conversion motor to achieve stepless speed regulation of 60-8000rpm, equipped with dual-axis constant force lifting system and sand grinding blade disc, with digital display Rotation speed and timing function, lifting Travel up to 250mm.
The equipment adopts electronic constant force speed regulation, Speed range 100~ 8000rpm, maximum processing viscosity of 15000mPa.s, high-speed shearing and high-frequency mechanical effects to achieve efficient mixing and dispersion.
