Using a 29.7 × 29mm pump and a 2 kg load weight, the material consistency was accurately determined by the spread diffusion diaMeter of the Basis Weight specimen on the Glass platen, meeting the standard test requirements.
The device uses 20.70ml pump volume and 2kg weight load, which can accurately measure the flow spread diffusion diaMeter of the sample under fixed pressure, ensuring the consistency test, repeability and accuracy.
Adapt to a variety of Viscometer use, suitable for factory field applications, real-time printing measurement results, no need to hand copy, easy operation, can save labor time.
The test program can be uploaded to the Viscometer host, the analysis record data can be collected, the rheological Linear dispersion and Excel can be generated, and five sets of data can be plotted and compared at the same time.
Measurement accuracy of 0.1 ℃, range of 0~ 100 ℃, real-time display of temperature values, suitable for a variety of Viscometer models, to ensure a stable test environment.
Measurement range 40.2~ 141.0KU, swirl/spin speed 200rpm, Repeatability +/- 1% F.S, using bar lifting mode, direct display reading data without weight.
Silicone oil standard solution, calibrated viscosity 380cp, capacity 400ml, suitable for Viscometer calibrating.
Measurement accuracy +/- 2%, equipped with 5 calibrated oils to ensure measurement accuracy, as a special accessory for cone-plate viscoMeter to achieve stability testing.
The shear rate is 2.0N, only 0.5ml sample volume can be completed to complete the test, suitable for a variety of models of Viscometer host, to meet the measurement needs of different viscosity ranges.
Provides accurate viscosity values of 5.7cp, 400ml per bottle for Viscometer calibrated measurement Stability and Reliability.
Range 5-50p, accuracy of +/- 2%, equipped with 5 kinds of special calibrated oil to ensure measurement accuracy, as the core component of cone-plate viscoMeter to ensure test Stability.
Shear rate 3.84N, sample size only 0.5ml, suitable for a variety of Viscometer models, ensuring High Accuracy measurement and wide applicability.
Nozzle of stainless steel with anodic oxidation aluminum Cup body, diaMeter of flow hole 6mm, viscosity measurement range of 22-2000cSt, suitable for rapid consistency determination of Newtonian behavior liquid.
Made of stainless steel, the slurry diaMeter is 50mm, the Rod length is 400mm, the mixing performance is mild, the tangential flow is generated during medium and low speed operation, the turbulence is small and the heat exchange effect is good.
Made of stainless steel, the diaMeter of the slurry is 50mm, the Rod length is 350mm, and the medium and high speed stirring performance is stable, which is suitable for mixing operations of various medium and low viscosity liquids.
