The equipment is designed according to the international coating stain resistance experimental method, the water Tank volume is 5L, the inner diaMeter of the flow pipe is 8mm, and the time control range is 0~ 99h99s. It is suitable for the stain resistance test of building exterior coatings.
Provide an additional one-year warranty period, which is applicable to Coating thickness Gauge pRoducts. It needs to be purchased simultaneously when purchasing the equipment and is not sold separately.
Dedicated to Coating thickness Gauge calibrating, ensure accurate thickness measurement, suitable for F type equipment, improve Reliability.
Measurement range 0~ 1250μm, suitable for LEEB220 and LEEB222 Coating thickness Gauge, Abrasion Resistance is good, suitable for a variety of nonmagnetic Coating thickness detection.
Using laser reflection principle to achieve one-sided measurement, accuracy of 0.1mm, can simultaneously obtain multi-layer Glass and air layer Film thickness, support automatic and manual mode, adapt to three glass two Chambers, laminated Glass and other materials.
Using eddy current sensing principle and probe probe design, especially suitable for small size and profiled material measurement; Measurement range 0-1500 μm, resolution up to 0.1 μm, repeatability error ≤ +/- （ 0.8% reading + 0.1 μm), support multi-point calibrating and data statistics function.
High Accuracy Time Controller and Solenoid Valve are used to automatically control the flushing time. The water Tank and pipe fittings are made of stainless steel, resistant to corrosion, small in size and light in weight, easy to install and operate, and the time control range is 0-100 hours.
Measurement accuracy with professional calibrating services for quality control and equipment maintenance, purchased with Coating thickness Gauge.
Equipped with a high-resolution color display and USB interface, it can store 2000 readings, support high temperature surface measurement up to 300 ° C, Accuracy up to +/- 1 μm, automatically identify the substrate and have online statistics.
Measurement of nonmagnetic coatings on ferrous metals, thickness range 0-6000μm, accuracy +/- 3%, built-in Probe single-handed operation, Protection Rating IP65, 60 + readings per minute.
Supports 2000000 readings storage, operation temperature range -20 ° C to 70 ° C, IP64 Protection Rating, Probe with temperature compensation for easy calibration on rough, smooth and curved substrates.
Measurement range 0-10mm, accuracy ≤ 0.02mm, using Dial reading, Graduation 0.01mm, upper probe diaMeter 6mm plane, suitable for workshop site and laboratory thickness measurement.
Mechanical design for measurement on any surface, using hardened stainless steel, measurement disc diaMeter 50mm, thickness 11mm, equipped with aluminum free swirl/spin rollers, reading accuracy +/- 2μm.
Adopt automatic potential Titrimetric method, built-in standard method to directly read the results, support silver nitrate (AgNO3) calibration and blank experiment, data management can store 200 sets of results, titration analysis Repeatability of 0.20%.
The three-wheel structure design is adopted, and the center wheel contacts the film directly for reading. The measuring range is 0-500 μm and the indexing is 25 μm. It can perform nondestructive thickness measurement on plane and curved surface.
