Double groove design can achieve rapid fineness detection, Measurement range 0~ 100μm, accuracy +/- 2 microns, wear-resistant and anti-corrosion stainless steel material, suitable for a variety of material fineness determination.
Double groove structure can be measured twice at the same time, Measurement range 0~ 25μm, accuracy +/- 2μm, hardened stainless steel material wear and corrosion resistance, suitable for a variety of material fineness detection.
Tool steel hardened and polished, accuracy +/- 2μm, range 0-15μm, ergonomic design, easy to hold, suitable for particle size and fineness of grinding detection.
The kit can realize automatic grinding fineness Gauge operation, improve test Repeatability, suitable for standard scraper fineness Meter supporting use, simplify the experimental process.
Using 15.5cm/min ink wiping speed, equipped with 0.1mm ink coating platen, the test process is precisely controlled by 4.3 inch Touchscreen, which can accurately determine the absorption capacity of the material to the inks vehicle.
The ink wiping speed of the instrument is 15.5 +/- 25px/min, the ink absorption time is 120 +/- 5s, and the 4.3 color Touchscreen control can accurately evaluate the acceptance of inks and the absorption capacity of the vehicle.
Automatic ink running stability, ink time and speed can be set, printing pressure 0~ 2mm adjustable, provide low, medium and high three printing speed, each time can be proofed 4 colors to facilitate Color contrast.
Using metal plating anilox roller, the number of lines can reach 180 lines/inch, which can precisely control the film fineness, and is suitable for the uniform Spreader test of inks Coating glue on various substrates.
The device can precisely control the film thickness of the ink layer of the color strip, and the ink injection amount is 0.0012g, which is used for ink contrast and color concentration detection.
Tool steel hardened and polished, accuracy +/- 2μm, range 0-250μm, ergonomic design for easy holding, suitable for particle size and fineness of grinding inspection.
Made of Cr12 molybdenum vanadium steel, excellent wear resistance, measurement Graduation of 10 μ m, suitable for fine particle fineness determination.
Made of Hardness 52 +/- 2HRC wear and corrosion resistant alloy steel with 0-100μm range and 5μm Graduation, the single-channe design meets several international standards for a wide range of material particle Fineness measurement.
Tool steel hardened and polished, accuracy +/- 2μm, range 0-100μm, suitable for particle size and fineness of grinding inspection, ergonomic design for easy grip.
Precise control of ink layer thickness, the minimum Basis Weight unit is 0.01CC, and the usage of Spot Color inks is predicted by calculation, which is suitable for ink contrast and color concentration detection.
With metal plating anilox roller and rubber roller, the number of anilox lines reaches 300 lines/inch, which can precisely control the film fineness, and the print width of 70mm is suitable for testing of various materials.
