It can simultaneously measure more than 10 physical paraMeters such as angle of repose and tap density. The vibration frequency is 300 rpm, and the repeatability error is ≤ 3%. It supports a variety of national standard test methods to meet the needs of comprehensive characteristic analysis of powder.
Adopt swirl/spin vibration mode, frequency 250 rpm, vibration amplitude 3mm, support remote control and embedded system, ensure test Stability and high repeability accuracy.
Adopt three-station design, vibration frequency 250 rpm, vibration amplitude 3mm, built-in micro-printer and 32-bit microprocessor, support automatic mass reading and electronic report generation, easy to operate and firm structure.
Double station design, vibration frequency 250 rpm, swirl/spin vibration mode, amplitude 3mm; built-in micro printer, support automatic reading of electronic scale mass, repeatability error ≤ 1%, with stable embedded system.
Adopt swirl/spin vibration mode, vibration frequency 250 +/- 15 rpm, vibration amplitude 3 +/- 0.1mm, built-in micro printer supports fast output results, with stable embedded system and network connection ability.
Adopt swirl/spin vibration mode, vibration frequency 250 rpm, vibration amplitude 3mm, built-in embedded micro-printer, calculation results are accurate to 3 decimal places, with excellent network connection ability.
Adopting a dual-station design, the vibration frequency is 250 rpm, and it is equipped with a 4.3-inch touchscreen and an embedded micro-printer. It supports electronic report generation and remote software upgrades. The structure is firm and easy to operate.
Adopting dual-station design and 250 rpm vibration frequency, equipped with 3mm vibration amplitude and built-in micro-printer, the calculation results are accurate to 3 decimal places, and support electronic report generation and remote software upgrade.
Using swirl/spin vibration mode, frequency 250 rpm, vibration amplitude 3mm, long life motor and 32-bit embedded processor, with low cost, low power consumption and strong Stability, easy operation and firm structure.
Adopt swirl/spin vibration mode, vibration frequency of 250 rpm, equipped with 4.3 inch touch screen and built-in micro printer, support automatic reading of powder mass, calculation results are accurate to 3 decimal places, the structure is firm and easy to operate.
Adopt dual station design and 250 rpm vibration frequency, equipped with 4.3 inch touch screen and built-in micro printer, support automatic reading powder mass, calculation results are accurate to 3 decimal places, with good network connection ability.
The three-station design can test multiple samples at the same time, and the vibration frequency is 250 rpm to ensure efficient and uniform vibration. The built-in micro-printer directly outputs the results, and the calculation accuracy reaches 3 decimal places. It supports electronic report generation and remote software upgrade.
Adopt three-station swirl/spin vibration design, vibration frequency 250 rpm, vibration amplitude 3mm, built-in embedded micro-printer and automatic mass reading function, calculation results are accurate to 3 decimal places, repeatability error ≤ 1%.
It adopts swirl/spin vibration mode, with a vibration frequency of 250 rpm, is equipped with a 4.3-inch touch display screen and an embedded micro-printer, supports electronic report generation, and has a solid structure and easy operation.
Using 32-bit embedded microprocessor and customized operating system, with 250 rpm vibration frequency and 3mm vibration amplitude, support automatic mass reading and built-in micro printer function.
