Using formed process, wet film thickness 35 microns, application width 400mm, continuous wire, uniform film and good repRoducibility, easy to clean after the experiment.
The precision drawing stainless steel wire winding structure is adopted, and the wet film thickness is precisely controlled by the groove. The closed winding design supports 4-120 μm coating, and the spiral winding can reach 500 μm thickness.
Coating thickness control of 4-120μm using wire-wound structure, spiral winding design up to 500μm thickness, with 220mm application width and 0.64mm wire diaMeter to ensure Spreader uniformity.
Precision drawn stainless steel wire winding manufacturing, forming a uniform groove to control the wet film thickness, closed winding structure can be Spreader 4-120μm coating, spiral winding up to 500μm, diaMeter 9.5mm to ensure Spreader Stability.
Precision drawing stainless steel wire winding manufacturing, groove control wet film thickness accurate, repeatability, closed winding Spreader thickness of 4 to 120 μ m, spiral winding up to 500 μ m, diaMeter 9.5mm total length 570mm.
The wire-wound design ensures uniform coating application, with a wet film thickness of 109.7 microMeters and a coating width of up to 300 milliMeters, making it suitable for surface treatment on a variety of substrates.
It can control the wet film thickness as low as 1.5μm. It adopts extrusion process and 304 stainless steel material. The bottom of the groove is wider and the Coating Weight is larger, and it is not easy to loosen and break the wire, and it is easy to clean.
Using wire-wound process, wet film thickness 12 μ m, application width 220mm, through precision winding stainless steel wire to form a uniform groove, to achieve precise and controllable Coating thickness.
The precision drawing stainless steel wire winding process is used to form uniform grooves to control the Coating thickness, the wet film thickness reaches 120μm, and the application width is 220mm to ensure the accuracy and repeatability of the coating.
The wet film thickness can be as low as 1.5μm to achieve ultra-thin Spreader; the bottom of the groove is wider, and the Coating Weight is larger; the extrusion process is adopted to avoid the problem of loose wire and broken wire, and it is easy to clean.
Using extrusion process and 304 stainless steel material, the wet film thickness can be controlled by 1.5μm, and the bottom of the groove is wider to increase the Coating Weight, so as to avoid the problem of steel wire loosening and blockage.
Formed process to achieve 35 micron wet film thickness, uniform film and good repRoducibility, 304 stainless steel material is not easy to break and easy to clean.
Made by wire-wound process, wet film thickness 50μm, application width 420mm, uniform groove is formed by precision stainless steel wire winding to achieve accurate control of Coating thickness.
Coating thickness is controlled by wire-wound structure, wet film thickness reaches 100μm, application width 420mm, uniform groove is formed by precision stainless steel wire winding to achieve repeability Spreader effect.
Wound wire design, wet film thickness 125.7 microns, coating width 300 mm, stainless steel material ensures durability and precise coating effect.
