Single-angle color measurement analyzer

A single-angle color analyzer irradiates the sample with a fixed-angle light source, and the sensor receives the reflected light and converts it into an electrical signal to calculate color parameters. It is used to measure the surface color of coatings, plastics, etc., ensuring color consistency between batches and applied in production quality control.
Selection
When selecting a single-angle color measurement analyzer, it is essential to consider measurement repeatability, sample adaptability, and environmental stability. Ensure compliance with industry standards, determine the probe type based on the actual size and shape of the samples, and verify that the data is compatible with existing processes.

Terms

Instruments

With 20 °/60 °/85 ° three-angle simultaneous measurement, measurement range of 20 ° up to 0-2000Gs, 2.4-inch color screen and 3000mAh lithium battery, support data storage and Bluetooth connection, Stability is high and portable and durable.

$ 554.00

Single angle 60 ° measurement, Stability 0.4GU, Repeatability 0.5GU, Automatic calibration without manual operation, can store 254 sets of data, lightweight and portable design.

$ 240.00

Equipped with 8 Measurement Angles and 6 light sources, the measurement of flicker, color flash and granularity, Color Repeatability up to 0.03Delta E * ab, high surface Measurement accuracy, suitable for special finish characterization.

$ 14274.00

With a standard 45 degree tilt angle, the same as the light box base color does not interfere with the viewing effect, Dimension 395 * 350mm, weight 1.2Kg, flexible placement and easy to disassemble and transport.

$ 106.00

Using 12 Measurement Angles and industrial-grade MCUs, the measurement time is about 1 second/angle, the repeatability is up to 0.02Delta E * ab, and it supports Multi-ParaMeter measurement such as scintillation, color flash, and granularity. Measurement accuracy is high.

$ 22342.00

With 45 °/0 ° illumination and D65 Measurement light source, viewing angle of 10 °, support for multiple Color model conversion, weight of only 45g for portability, quality control and complementary color suggestions.

$ 380.00

Adopt 60 ° Measurement Angles, Measurement range 0~ 1000GU, Repeatability 0.2GU, support USB and Bluetooth interface, can store 10000 sample data, suitable for surface Gloss measurement of various materials.

$ 332.00

Equipped with 3 Measurement Angles and 256 pixel dual array CMOS image sensors, the measurement wavelength range is 400~ 700nm, with High Accuracy and Stability in surface measurement, suitable for the evaluation of complex special effects Color.

$ 4592.00

With 15 °, 45 °, 110 ° three-angle measurement function, can simultaneously obtain Color data, flicker and particle grade; built-in automatic white calibrating, no human intervention; with stable long-life LED Illuminant, the service life is up to 10 years.

$ 11100.00

Equipped with 5 Measurement Angles and 256 pixel dual array CMOS sensors, the measurement wavelength range is 400~ 700nm, and the surface measurement still maintains High Accuracy and Stability, suitable for the evaluation of complex effect Color.

$ 7819.00

Using 320 × 240 color screen display, measurement accuracy of +/- 0.5%, support full angle measurement, can store 10000 data, Built-in Printer is convenient for on-site output, to meet the needs of a variety of hardness of materials testing.

$ 1997.00

Adopt 60 ° Measurement Angles, Measurement range 0~ 999GU, Measuring Area 18 * 36mm, Built-in rechargeable battery can be used continuously for more than 40 hours, Stability 1.2GU.

$ 409.00

Contains 216 Classic Colors, color block size up to 5x15cm, single page monochrome design for accurate color matching, equipped with U-shaped protective cover to enhance durability, support industry standard color applications.

$ 145.00

With 60 ° Measurement Angles and 0-200Gs range, it supports single and continuous measurement, built-in mass storage and Bluetooth connectivity, making it easy to operate and portable.

$ 323.00

With three projection angle measurement function, Measurement range 0~ 2000GU, Repeatability +/- 0.5GU, can simultaneously measure Glossiness and fog shadow value, support 56 groups of Data storage.

$ 992.00

Articles

Spectrophotometer measures ink spectral reflectance and opacity.
This article introduces how to measure the hiding power of ink using a spectrophotometer. The instrument irradiates the ink sample, measures its reflectance within the visible light spectrum, and calculates the hiding power using the Kubelka-Munk model.
The combination of hiding power chart paper and a spectrophotometer enables the digital evaluation of hiding power.
This article introduces how to combine hiding power cards with spectrophotometers to achieve digital assessment of hiding power.
Colorimeter evaluation of color difference in anodized coloring layers
This article explains how colorimeters are used to evaluate color differences in anodized coloring layers. It describes how colorimeters convert colors into numerical values based on international standards and quantify color variations by calculating the color difference ΔE.
Cylindrical Mandrel Bending Tester for Detecting Flexibility of Coatings
This article introduces how the cylindrical shaft bending tester detects the flexibility of paints. Flexibility refers to the ability of the paint film to resist cracking when the substrate is bent.
A spectrophotometer uses digital language to describe colors, making color differences impossible to hide.
A spectrophotometer measures the color of an object through spectral analysis, converting reflected light data into spectral curves. It then calculates chromaticity parameters such as L*a*b* based on international standards, achieving a digital representation of color.
How to Interpret Color Difference Lab Values Measured by a Spectrophotometer? Save This Color Difference Judgment Standard Now!
This article explains how spectrophotometers measure and evaluate color differences using the Lab color space. In the Lab values, L represents lightness, while a and b indicate the red-green and yellow-blue color biases. The color difference ΔE is calculated using a formula to quantify the variation between a sample and the standard.