Support bar and drawdown blade two coating methods, application width 300mm, heating temperature up to 180 ℃, with intelligent program control function, can remotely set film paraMeters to ensure Spreader uniformity and accuracy control.
Four-speed proofing speed is optional, up to 45m/min, using flat engraving plate for direct printing, supporting 95 × 149mm concave sample range, suitable for fast proofing of flexible substrates.
Using metal layer plate structure, Temperature range -7~ 70 ℃, support 13 point temperature measurement, can simultaneously Spreader 6 samples, through drying air flow and layer temperature to achieve accurate film formation detection.
Using copper plate platform and long-life heating tube, PID intelligent temperature control accuracy +/- 1 ℃, rapid heating to 200 ℃ only 10 minutes, suitable for a variety of Resin materials gel time determination.
Using 160 * 280mm size, with wire Rod scraping ink to ensure that the film is flat, Glass table is conducive to operation and observation effect.
Using DAIDO 440C medical grade stainless steel material, after sub-zero vacuum hardening to HRC55 Hardness, application width 75mm, wet film thickness 50μm, overall accuracy +/- 2μm, suitable for smooth flat surface Spreader operation.
Application width 100mm, wet film thickness 100μm, stainless steel corrosion resistance, ensure that the film is uniform and flat, improve the test Reliability.
The Spin Coater is controlled by touch screen, the acceleration range is 100~ 4000rpm/s, and the speed can be automatically corrected by A/K selection. The motor torque is large and the operation is smooth, which is suitable for the assembly line process.
Using stainless steel material with acid and alkaline resistance, wet film thickness 250μm accuracy of +/- 2μm, suitable for flat and sturdy substrate film operation.
Spreader thickness range 0~ 10mm, coating speed 5~ 180mm/s, equipped with high flat Glass table, support stepless speed and automatic feeding function, to ensure uniform and stable Spreader.
Using infrared radiation heating, fine grinding mirror drying surface, heating power 2.0KW, maximum temperature 180 ℃, drying size 600mm × 350mm, to ensure uniform drying and smooth surface.
Adopt 4mm suspension hole design to avoid the accumulation of paints, with PE protective film to prevent scratches and corrosion, 0.8mm aluminum plate material meets a number of international test standards, support horizontal and vertical suspension without leaving traces.
Using DAIDO 440C material, wet film thickness 200μm, accuracy +/- 2μm, with flat edge design, suitable for coating different substrates.
Equipped with dual-channel vacuum bed and intelligent lighting interface, coating speed 0.1-500 mm/s, Travel accuracy +/- 2mm, supports a variety of film tools to ensure uniform film thickness and sample repeatability.
Grinding hard chrome metal pressure plate, adjustable temperature range -10~ 80 ℃, equipped with 10 point temperature transducer, through drying air flow to prevent condensation, ensure test repeatability, in line with a number of international standards.
