With dual pointer design can display peak and continuous load at the same time, external tolerance indicator is easy to judge the force value, the maximum Measured value is 100KN, Indication Error +/- 2% FS, suitable for electromagnetic interference environment.
Double pointer design to achieve peak holding and continuous load indication, external tolerance indicator to facilitate force value judgment, Maximum Measured value 200KN, Indication Error +/- 2% FS, suitable for electromagnetic interference environment.
Double pointer design with peak holding and continuous load indication function, external tolerance indicator to facilitate force value judgment, Maximum Measured value 10KN, suitable for electromagnetic interference occasions.
Dual pointer design with peak holding and continuous load indication function, Maximum Measured value 20KN, with external tolerance indicator to facilitate force value judgment, suitable for electromagnetic interference environment.
Using S-type Sensor structure, Measurement accuracy of +/- 0.5%, with 10 data storage and automatic calculation functions, support for automatic conversion of N/kgf/lbf units, peak hold and automatic release functions can be freely set time.
It can be used with Force Gauge for vertical and horizontal testing, suitable for accurate measurement of thrust or tension, stable structure and easy operation.
Measurement range 10%~ 100% FS, accuracy error less than +/- 0.5%, with peak holding, Data storage and automatic alarm functions, support for automatic conversion of various units and PC connection to achieve Linear dispersion test.
Rated load 1000N, Travel 100mm, manual operation is stable, can adapt to a variety of Force Gauge, suitable for tension and compression load and plug force test, horizontal structure for desktop installation.
Using S-type external Sensor, Measurement range 10%~ 100% FS, Indication Error less than +/- 0.5%, with peak hold and automatic unit conversion function, support Data storage and sound and light alarm settings.
Using S-type Sensor structure, Measurement range 10% -100% FS, Indication Error less than +/- 0.5%, with peak hold, automatic alarm and Data storage functions, support Linear dispersion test and machine linkage control.
Using S-type external Sensor, Measurement range 10%~ 100% FS, accuracy +/- 0.5%, Data storage, peak hold, automatic alarm and RS-232 communication functions, support a variety of test applications.
Hollow cylinder center aperture 65mm, maximum tension 600KN, manual pump high voltage 63Mpa, digital pressure Gauge direct reading tension value, compact structure and easy to carry.
With tracking pointer and peak pointer double pointer design, pressing needle Travel 0-2.5 mm, Measurement range 10-90Hc, suitable for material testing with pressure above 0.049MPa when the compression rate is 50%, and can be matched with test bracket to improve Stability.
Dial indication for easy reading, with dual unit display function without conversion, can freely switch peak holding and real-time value mode, Measurement accuracy of +/- 1%, push-pull Rod Travel 10mm, suitable for all kinds of fixture installation.
With dual unit display function, Indication Error is only +/- 1%, push-pull Rod Travel 10mm, handheld design is compact and portable, and can be adapted to a variety of fixtures and tables for accurate measurement.
