Using 2000g +/- 5g roller load and 300mm/min rolling speed to ensure that the adhesive tape sample is flat and evenly adhered to the standard substrate, in line with CNS-11888 and PSTC-8 design standards.
Precision ball screw drive and double rail design, Force Measurement range 0.03-200 N, Accuracy grade 0.5, support a variety of unit selection and intelligent calculation test results, equipped with micro printer and overload protection function.
Using double-sided uniform tin plating process, the surface mass reaches class I, Hardness is T52, standard thickness is 0.28mm, to ensure accurate and reliable film test results.
Using silicon carbide Rod double-sided heating, rapid heating and high thermal efficiency; maximum temperature 1200 ℃, temperature control accuracy +/- 5% ℃; PID microcomputer control combined with K-type Thermocouple, temperature accuracy and stability.
The High Accuracy Sensor is used to achieve 0.5 level Measurement accuracy, supports 5~ 500mm/min speed range, and is equipped with automatic Linear dispersion analysis function, which can calculate interval results and distinguish MAX Maximum, MIN Minimum and Average.
Using CR12 molybdenum vanadium material double edge structure, film thickness 500μm/600μm, U-shaped design to achieve fast Spreader, effective application width 80mm, total length 100mm, suitable for wet-film preparatory.
Suitable for a variety of Corrugated Board adhesive strength test, equipped with different specifications of steel needles, needle diaMeter range 1.0-3 mm, support A, B, C, E corrugated test, sample size 25 × 80mm.
With 0.5 accuracy and 5~ 500mm/min speed range, using High Accuracy Sensor and stepper motor control, support automatic Linear dispersion analysis and multi-interval result calculation, effective Travel up to 400mm.
Double-sided design can provide 75/150μm two kinds of wet film thickness, effective Spreader width 12.7mm, wear-resistant corrosion-resistant alloy steel material to ensure accurate control of film Film thickness, to ensure coating conformity and Repeatability.
Precision ball screw drive system, Force Measurement range 0.005-30N, Accuracy grade 0.5, equipped with 5-inch high definition Touchscreen and intelligent operation function, support a variety of unit selection and USB data export.
Precision ball screw drive and double rail structure ensure displacement accuracy of 0.001mm; support 1-500mm/min stepless speed regulation, equipped with High Accuracy Force Sensor to achieve 0.5 level accuracy measurement, with overload protection and data statistical analysis function.
Double-sided different film Film thickness design, wet film thickness 150/200μm, Spreader width 80mm, wear-resistant corrosion-resistant alloy steel material, suitable for a variety of materials experimental film preparatory.
The adhesive force of the tape is 4.3N/cm, and the principle of cross-cut method is adopted, which is suitable for adhesion testing. The performance is stable and non-degumming, and the test results are accurate and reliable.
The double-sided design can provide two wet film thicknesses of 38μm and 76μm, the effective Spreader width is 12.7mm, and the alloy steel material is wear-resistant and corrosion-resistant to ensure coating conformity and Repeatability.
Double blade design can be prepared 75μm or 100μm two wet film thickness, effective application width 80mm, using molybdenum vanadium material, suitable for film proofing.
