Adopt gear pair drive, hand-pressed operation, rated load 500N, Travel 70mm, the upper and lower height of the frame can be adjusted, Force Gauge has a positioning structure, suitable for batch testing.
Adopt hand-crank mechanical pressurization method, Heating power 650W, Mold sleeve specification < 40mm, suitable for small or irregular samples, support thermosetting material inlay.
Hand-crank mechanical pressurization is easy to operate, digital temperature controller to ensure stable temperature, Heating power 440W, mold sleeve specification < 25mm, suitable for thermosetting material inlay, protect the edge of the sample.
Adopt gear pair transmission, hand-pressed operation, the height of the frame can be adjusted up and down, Force Gauge up and down movement is equipped with positioning structure, rated load 500N, Travel 70mm, suitable for batch testing.
Rated load 500N, rack and pinion drive, hand pressure operation is simple and stable, large foot design to ensure smooth measurement process, Travel 75mm, suitable for Force Gauge installation for tensile or plug force test.
Adopt 0-3000rpm stepless speed regulation, Processing capacity 10-100L, with full explosion-proof structure and hand lifting system, suitable for dispersing and mixing of high viscosity materials.
Hand pressure type is easy to operate, the rack and pinion transmission is smooth, the digital display ruler can display the displacement and lock the Travel, the maximum test load is 500N, the measurement Travel is 200mm, and the base is stable and the fuselage is heavy.
Wet film thickness 92 microns, diaMeter 10 mm, 304 stainless steel material extrusion process, application width 300 mm, to ensure uniform coating.
The extrusion molding process is used to ensure the uniformity of the coating, the wet film thickness is 100μm, the application width is 250mm, and the stainless steel material is durable and easy to clean and maintain.
Wet film thickness 137.2 μm, coating width 300 mm. The wire-wound structure enables the preparation of uniform coatings on both flat and easily raised substrates, while the two-end hand grip design facilitates even force distribution during operation.
Using a formed pRoduction process, the wet film thickness is 76 μm, the accuracy is 0.5 μm, and the 304 stainless steel material is used to ensure durability.
Using formed pRoduction process, wet film thickness 6 microns, accuracy 0.5 microns, 304 stainless steel material to ensure durability and cleaning convenience, no risk of wire breakage.
With 0.5 Precision and +/- 0.5% FS accuracy, support for peak hold and forward and reverse dual displays, measurement of 100kgf range and buzzer overload alarm for multiple force unit conversions.
Made of titanium anodic oxidation aluminum and stainless steel, the flow hole diaMeter is 6mm, the capacity is 100ml, and the one-hand immersion measurement meets the DIN 53211 standard to ensure High Accuracy Viscosity Testing.
Measurement range 0~ 10mm, accuracy ≤ 0.02mm, probe center to the maximum measurement depth 130mm, Dial reading, portable handheld design, suitable for on-site rapid detection.
