Can measure 20~ 1000J/m ² Internal Bond Strength, resolution of 0.001lbf/in ², using 90 ° Impact Angle test principle, clamping force 0~ 40kg/cm ² adjustable.
Using high-performance ARM processor and 24-bit sampling chip, Measurement range 0-1000J/m ², accuracy < 1J/m ², with automatic testing and intelligent judgment functions, equipped with micro-printer real-time output data.
Measurement range 20~ 1000J/m2, resolution up to 0.01J/m2; Impact angle 90 °, can accurately test the internal bond strength, suitable for multi-layer paper quality control.
Using electric hydraulic pressurization device, eliminating manual labor; Measurement range 20~ 1000J/m ², resolution up to 0.01J/m ²; equipped with touch screen and thermal printer, testing is convenient and efficient.
Tensile Strength and elongation paraMeters can be detected, test force 500-3000N optional, accuracy +/- 1%, stepless speed 1-500mm/min, suitable for all kinds of paper and Cardboard materials.
Using ball bearing drive and imported motor, Measurement accuracy up to +/- 1%, tensile speed 1-399mm/min adjustable, support sample size flexible adjustment and automatic data statistics function.
Test method to achieve tensile compression test, Accuracy grade 1, equipped with 7-inch touch screen display tensile curve, support 50 kinds of fixtures to meet more than 1000 material testing needs.
Automatic Y-direction cutting, high positioning accuracy, adjustable feed speed 0.7-36 mm/min, cutting blade size Φ 205mm, equipped with a circulating chill down system to ensure that the surface of the sample is bright and flat without burns.
Using ball bearing drive and imported motor, Measurement range 0-30N accuracy of 0.01N, tensile speed 1-399mm/min adjustable, support sample size flexible adjustment and automatic data statistics.
Accessories can detect buttons and other fixed strength, to prevent loosening caused by sharp edge angle damage, the maximum tensile force of 30kg, suitable for clothing toys footwear and other pRoducts adhesion testing.
Using pneumatic adhesive sample pressing and automatic release, the test range is 0-1000J/M ², the accuracy is 0.001J/M ², the Z-direction failure energy is measured by pendulum Impact measurement, and the structural rigidity is strong to reduce energy loss.
Measurement accuracy +/- 1%, resolution 0.01N, support 1-399mm/min speed adjustment and 0-200mm sample length control, with automatic data statistics and overload protection functions.
Adopt ball bearing drive and imported motor, with low noise and accurate control; 0~ 1000N force range, adjustable tensile speed from 1 to 399mm/min; support sample size flexible adjustment, with automatic reset and overload protection functions.
Using ball screw and 3 guide shaft drive mechanism, Measurement range 0-1000N, support a variety of sample size and tensile speed adjustment, built-in thermal printer and RS232 Communication interface.
Adopt horizontal structure and High Accuracy deceleration servo drive system, equipped with precision ball screw and double linear slide rail, force value resolution up to 0.001N, support a variety of stop modes and unit selection, can realize stepless speed regulation function.
