Measurement range 20~ 1000J/m ², resolution 0.1J/m ², with Touchscreen operation and thermal printing function, suitable for a variety of Cardboard Internal Bond Strength accurate determination.
Hydraulic automatic pull-off test, the pull-off speed is stable and controllable, the accuracy is +/- 1% full scale, equipped with pull-off kit size 10-50mm, built-in rechargeable battery and 200,000 Data storage.
The maximum pull-out force is 300kN, the central aperture is 45mm, and it adopts a hollow self-resetting hydraulic cylinder design. The reading can be directly read the tensile force value, and the service life is long and it is light to carry.
Adopt double guide Rod structure to ensure Stability, Maximum Measured value 5000N, Travel 220mm, support stepless speed regulation and a variety of test modes, with pull-off stop and force retention functions.
High Accuracy S type sensor accuracy of 0.5%, range 0-10KN, with pull-off automatic stop function, three operation modes optional, can directly enter the test block area display force value and strength value
Maximum pull-out force 40kN, using three-point reaction support and post-loading pull-out method principle, with color Touchscreen display force value and time Linear dispersion, support automatic storage of 10000 data.
Using mechatronic portal structure, equipped with 65mm pull Travel and 0.001kN resolution Sensor, support 500 Data storage and full scale 6 segment line correction, suitable for on-site rapid detection.
Adopt low-noise stepless speed regulation motor, with a speed range of 0-500mm/min, with force holding function and four test modes, equipped with limit protection device, support pull-off stop and set force value round-trip motion.
Measurement range 20-1000J/m ², accuracy of +/- 1-2J/m ², support 25.4mm sample size and 0-40kg/cm ² adjustable clamping force, equipped with thermal printer and LCD display.
Range 0~ 6.000kN, accuracy ≤ +/- 1%, drawing Travel 10mm, compact structure can be continuously uniformly loaded, automatically maintain the peak bonding force, suitable for low bonding force detection.
Maximum load 0.5KN, specially designed for pull ring samples, compact structure, easy installation, suitable for tensile testing of a variety of materials, providing reliable data support.
Adopt S-type Tension Sensor to Ensure High Accuracy, Built-in Micro Hydraulic System, Support Strength and Force Measurement modes, Continuous Operating Time over 200 hours, Range 0~ 10KN.
Range 10kN, accuracy ≤ +/- 1.0% F.S, using mechatronics design, weight only 2.8kg, handle operation labor-saving, can directly display the strength value and have automatic shutdown function.
The two-stage gravity overlap structure ensures accurate measurement, with a resolution of 0.001 lbf/in ², supports fully automatic release and real-time calibrating, and is suitable for internal bond strength testing of various sheet materials.
Portable design built-in lithium battery, 0-3000p range accuracy +/- 1%, equipped with 10-50mm pull-off spindle, automatic calculation of pull-off force without conversion table, aluminum alignment unit to ensure uniform testing.
