The mirror stainless steel liner is easy to clean, the three-speed speed regulating fan avoids sample volatilization, the temperature fluctuation +/- 0.5 ℃ temperature control is accurate, the environmentally friendly refrigerant operates with low energy consumption, and supports temperature limit alarm to ensure safety.
Explosion-proof design, suitable for flammable and explosive environment; with variable speed stirring function, can quickly and accurately disperse material particles to meet the grinding process requirements of paints, inks and other industries.
Adopt low-noise stepless speed regulation motor, with a speed range of 0-500mm/min, with force holding function and four test modes, equipped with limit protection device, support pull-off stop and set force value round-trip motion.
Automatic ink running stability, ink time and speed can be set, printing pressure 0~ 2mm adjustable, provide low, medium and high three printing speed, each time can be proofed 4 colors to facilitate Color contrast.
Set dispersion and stirring functions in one, Speed range 100-8000rpm, manual lift Travel 250mm, suitable for fluid material experiments, high efficiency and easy cleaning.
Three cutting methods are available, with a maximum cutting diaMeter of 30mm. It is equipped with a 7-inch Touchscreen and a fully enclosed safety protection structure. The work surface is made of stainless steel, and fast clamps and vertical clamps are provided to meet different sample clamping needs.
Using 15.5cm/min ink wiping speed, equipped with 0.1mm ink coating platen, the test process is precisely controlled by 4.3 inch Touchscreen, which can accurately determine the absorption capacity of the material to the inks vehicle.
It can display 45 × 210mm and 106 × 210mm color bars simultaneously, providing 450-800 rpm ink leveling speed and 1-120 seconds ink leveling time adjustable, with built-in pressure adjustment to ensure accurate and stable color.
High dispersion efficiency and no need to clean, Crankshaft Rotation speed 660rpm, up and down amplitude 16mm, vertical structure equipped with shock absorber spring, support bottle and can two Operating Mode.
The equipment supports 0-2MM pressure adjustment, providing three-speed printing speed (10/15/20 rpm) and uniform ink speed (650/800/1000rpm), which can imprint 2.5mm thick paper and 1mm plastic film to achieve precise uniform ink and stable operation.
Vertical double air duct air sleeve structure with turbine centrifugal forced air supply, Temperature Uniformity +/- 1.0 ℃, speed regulating fan supports lightweight and small samples, low water level alarm and forced heat dissipation to ensure safe operation.
The ink wiping speed of the instrument is 15.5 +/- 25px/min, the ink absorption time is 120 +/- 5s, and the 4.3 color Touchscreen control can accurately evaluate the acceptance of inks and the absorption capacity of the vehicle.
Provide uniform ink speed three adjustable 450 to 800rpm, color development speed three adjustable 12 to 25rpm, color development pressure range -20 to 80, support ordinary or UV ink roller, improve work efficiency and applicability.
It integrates dispersion and stirring functions, with a processing viscosity of up to 10000mPa.s, a speed range of 100-8000rpm, easy manual lifting operation, high efficiency and uniform mixing.
The ink wiping speed is 15.5cm/min, the opening area of the ink coating platen is 20cm ², and the ink absorption time is 120s. The test process is automatically controlled to accurately determine the absorption capacity and penetration performance of the paper to inks.
