Using double-sided uniform tin plating process, the surface mass reaches class I, Hardness is T52, standard thickness is 0.28mm, to ensure accurate and reliable film test results.
Using silicon carbide Rod double-sided heating, rapid heating and high thermal efficiency; maximum temperature 1200 ℃, temperature control accuracy +/- 5% ℃; PID microcomputer control combined with K-type Thermocouple, temperature accuracy and stability.
Double blade design can be prepared 75μm or 100μm two wet film thickness, effective application width 80mm, using molybdenum vanadium material, suitable for film proofing.
Using CR12 molybdenum vanadium material double edge structure, film thickness 500μm/600μm, U-shaped design to achieve fast Spreader, effective application width 80mm, total length 100mm, suitable for wet-film preparatory.
Double-sided design can provide 75/150μm two kinds of wet film thickness, effective Spreader width 12.7mm, wear-resistant corrosion-resistant alloy steel material to ensure accurate control of film Film thickness, to ensure coating conformity and Repeatability.
Double-sided different film Film thickness design, wet film thickness 150/200μm, Spreader width 80mm, wear-resistant corrosion-resistant alloy steel material, suitable for a variety of materials experimental film preparatory.
The double-sided design can provide two wet film thicknesses of 38μm and 76μm, the effective Spreader width is 12.7mm, and the alloy steel material is wear-resistant and corrosion-resistant to ensure coating conformity and Repeatability.
Made of wear-resistant and corrosion-resistant alloy steel, the double-sided design provides two film Film thicknesses of 70 and 100 μm, and the Spreader width is 80mm, which is suitable for experimental film preparation of various materials.
The double-sided design provides 300 and 400 μm film Film thickness, made of wear-resistant and corrosion-resistant alloy steel, Spreader width 80mm, suitable for uniform film preparation and coating performance testing.
Adopt double roller painting film structure, thickness adjustment range 0.001-2mm, Spreader accuracy +/- 5%, equipped with automatic deviation correction device and digital dial Meter, coating speed 0-20m/min adjustable, drying tunnel temperature up to 150 ℃.
The double-sided design can provide two film thicknesses of 150/300μm, using high-Hardness stainless steel material Hardness up to 50~ 55HRC, accuracy +/- 2μm and factory inspection report to ensure film accuracy.
Double-sided design provides 25/50μm two kinds of wet film thickness, Spreader width 80mm, wear-resistant corrosion-resistant alloy steel material to ensure long-term use Stability, suitable for a variety of material film experiments.
Using 470nm wavelength and double-sided LED Illuminant irradiation, equipped with amber filter and 105 * 163mm glue cutting area, accurate fluorescence sample separation operation can be achieved.
Using double-sided LED Illuminant and 400nm wavelength, equipped with amber filter, the glue cutting area is up to 105 * 163mm, which is convenient for accurate separation of fluorescently labeled nucleic acid protein samples.
Using 365nm wavelength double-sided LED Illuminant, equipped with amber filter, the glue cutting area is up to 105 * 163mm, which can clearly observe the fluorescence and accurately separate the target area.
