Size 100x150mm, Film thickness 0.3mm, rounded corners Perforating design for easy fixing and operation, suitable for a variety of industrial coatings performance testing, to ensure the accuracy of film testing and repeability.
Film thickness 0.3mm fillet Perforating design, suitable for coating adhesion, hardness, Impact and other performance testing, to ensure that the film preparatory smooth and stable.
Size 70x130mm Film thickness 0.3mm, rounded corners Perforating design is convenient for coating performance testing, suitable for adhesion, hardness, Impact and other film testing scenarios.
Film thickness 0.3mm fillet Perforating design, easy to paint adhesion, hardness, Impact and other performance tests, about 70 pieces per kilogram to meet the needs of batch experiments.
The equipment evaluates the performance by recording the number of wipes required for coating damage, the Wipe Test Frequency is 20~ 60cpm, the friction load is 1000 +/- 10g, and the standard test method is supported.
Double-sided uniform tin plating, surface mass I, Hardness T52, standard thickness 0.28mm, provide crimping listening plate, rounded corners with or without holes and other specifications, single batch pRoduction of 10w sheets.
Using double-sided uniform tin plating process, the surface mass reaches class I, Hardness T52, standard thickness 0.28mm, to ensure accurate and reliable film test results.
Punch diaMeter 20mm, indentation accuracy +/- 0.05mm, maximum depth 10mm, can measure the minimum depth of cracking or from the substrate of the coating, support single and double top coating test, equipped with digital display resolution 0.01mm.
With 450 +/- 2g brush weight and 300mm scrubbing Travel, scrubbing speed 37 +/- 2cpm, can accurately test the anti-scrubbing performance of coatings, suitable for interior and exterior wall coating inspection.
Using pure mechanical design, the coating performance is measured by conical mandrel bending test plate, the test plate size is 100mm × 180mm, the thickness is less than or equal to 0.8mm, and the operation is simple and reliable.
The pressure column and ball joint structure are used to ensure that the test surface is close, the pressure column mass is 250g, the bottom surface diaMeter is Φ 50 +/- 1mm, and it is equipped with 100g to 500g weight, which can simulate the contact performance of coatings under different pressure conditions.
Equipment provides bar and adjustable drawdown blade two coating methods, Spreader thickness range 0~ 10mm, coating speed 5~ 180mm/s, support custom Coating size 500 * 1000mm, suitable for a variety of substrates.
Spreader accuracy of +/- 0.05mm, Spreader thickness range of 0~ 10mm, coating speed 5~ 180mm/s, using high flat Glass table, support bar and drawdown blade two coating methods, can be customized automatic feeding and other functions.
Built-in gearbox reduces manual force, indentation depth Display resolution 0.01mm, maximum indentation depth 15mm, suitable for a variety of standard tests, stable operation and high accuracy.
The test area is 25cm ², which supports wet Cup method and dry Cup method test, which can measure the pass rate of water vapor to the film, and is suitable for coating penetration performance evaluation in different environments.
