The four-blade structure makes the mixed medium flow up and down radially, forming strong turbulence and high shear force, which can crush the particles in the liquid, the diaMeter of the slurry sheet is 80mm, and the Rod length is 350mm, which is suitable for stirring medium and high viscosity liquids.
Using 15.5cm/min ink wiping speed, equipped with 0.1mm ink coating platen, the test process is precisely controlled by 4.3 inch Touchscreen, which can accurately determine the absorption capacity of the material to the inks vehicle.
Automatic ink running stability, ink time and speed can be set, printing pressure 0~ 2mm adjustable, provide low, medium and high three printing speed, each time can be proofed 4 colors to facilitate Color contrast.
The ink wiping speed of the instrument is 15.5 +/- 25px/min, the ink absorption time is 120 +/- 5s, and the 4.3 color Touchscreen control can accurately evaluate the acceptance of inks and the absorption capacity of the vehicle.
The four-blade structure makes the mixed medium flow radially up and down, forming strong turbulence and high shear force. The diaMeter of the slurry is 40mm, which is suitable for stirring medium and high viscosity liquids.
The device can precisely control the film thickness of the ink layer of the color strip, and the ink injection amount is 0.0012g, which is used for ink contrast and color concentration detection.
The four-blade structure makes the mixed medium flow radially up and down, forming strong turbulence and high shear force. The diaMeter of the slurry is 120mm, which is suitable for stirring medium and high viscosity liquids.
The ink wiping speed is 15.5cm/min, the opening area of the ink coating platen is 20cm ², and the ink absorption time is 120s. The test process is automatically controlled to accurately determine the absorption capacity and penetration performance of the paper to inks.
The four-blade design realizes gentle mixing, with a pulp blade diaMeter of 100mm and a Rod length of 500mm. It is suitable for medium and low speed operation, and the stainless steel material ensures durability.
It can simultaneously print color bars of different Colors or Ink Film thickness, detect inks Hue and Gloss, uniform ink time can be adjusted from 1 to 800 seconds, support dry and wet ink discoloration analysis and abrasion resistance testing.
The blade width is 70mm and the height is 1.5mm, the Rod diaMeter is 6mm and the length is 350mm, the stainless steel material is resistant to corrosion, and the medium and high speed stirring pRoduces axial flow and local shear force.
Using bar and integrated Blade Coating, film thickness range 1~ 571.5 μm, coating speed 5~ 200mm/s, with Vacuum chuck and magnetic stirring function, to ensure uniform and stable Spreader, improve experimental conformity.
8Mm diaMeter design, mixing blade size 50mm * 50mm, with 300mm stirring Rod to ensure uniform mixing and viscosity testing Stability.
The use of low-speed intermittent barrel edge stirring, mixing inks evenly within five minutes without heating up, Speed range 0~ 60rpm, L-type paddle stirring design is clean and simple, direct transmission to reduce power loss.
Driven by brushless DC motor, Max. stirring Capacity up to 10 liters, stirring speed range of 150-2000rpm, with super stirring force, suitable for high viscosity liquid stirring.
