CATEGORIES

    Vertical High-Temperature Blast Drying Oven

    Overview Products Knowledge Standards Terms
    Vertical high-temperature forced air drying ovens heat air using electric heating tubes, with a fan circulating the hot air inside the chamber to evenly transfer heat to the samples. They are used for removing moisture from materials, curing coatings, heat treatment, and are commonly employed in laboratories for sample drying and material aging tests.
    Selection
    Select the inner chamber volume based on the sample size, and choose the heating range according to temperature requirements, typically 200-300℃. Consider temperature control accuracy and uniformity, with a corrosion-resistant stainless steel inner chamber. The observation window facilitates monitoring, and the over-temperature protection device ensures safe operation.
    Style
    Product Type
    Principle
    Airflow Direction
    Temp Range
    temperature resolution
    volume
    Heater Type
    Chamber Material
    Temp Fluctuation
    Temp Uniformity
    Safety Protection

    Terms

    Laboratory Sealed Electric Furnace
    Box-type high-temperature furnace
    Muffle furnace for ash determination
    Vacuum heating resistance furnace
    Ash Resistance Furnace
    PCT High Pressure Aging Test Chamber
    Tubular Atmosphere Furnace
    Tubular Vacuum Atmosphere Furnace
    PCT test chamber
    Laboratory Box Furnace

    Standards

    Active GB/T 43092-2023
    Electrochemical performance test of lithium ion battery cathode materials—Test method for high temperature performance
    Active GB/T 3780.30-2023
    Carbon black—Part 30：Determination of high temperature volatile matter—Thermogravimetry method
    Active GB/T 36264-2018
    Test method for tensile strength of fiber composites under ultrahigh temperature and oxidizing environment
    Active GB/T 37783-2019
    Metallic materials—High strain rate tensile test method at elevated temperature
    Active GB/T 38515-2020
    The method for high temperature mechanical properties of quartz fabric-reinforced resin matrix composite materials
    Active GB/T 5137.3-2020
    Test methods of safety glazing materials used on road vehicles—Part 3:Radiation,high temperature,humidity,fire and simulated weathering resistance tests
    Active GB/T 38924.3-2020
    Environmental test methods for civil small and light unmanned aircraft system—Part 3: High-temperature test
    Active GB/T 12085.23-2022
    Optics and photonics—Environmental test methods—Part 23：Low pressure combined with cold,ambient temperature and dry or damp heat
    Active GB/T 12085.22-2022
    Optics and photonics—Environmental test methods—Part 22：Combined cold,dry heat or temperature change with bump or random vibration
    Active GB/T 12085.2-2022
    Optics and photonics— Environmental test methods—Part 2: Cold, heat and humidity
    Active GB/T 42900-2023
    Metallic materials—High strain rate compression test method at elevated temperature
    Active GB/T 4937.23-2023
    Semiconductor devices—Mechanical and climatic test methods—Part 23:High temperature operating life
    Active GB/T 34220-2017
    Refractory Products—Determination of tensile strength at elevated temperature
    Active GB/T 34218-2025
    Refractory products—Determination of compressive strength at elevated temperatures
    Active GB/T 2423.102-2008
    Environmental testing for electric and electronic products - Part 2: Test methods - Test: combined temperature(cold and heat)/low air pressure/vibration（sinusoidal）

    Instruments

    BENTING CBGL-125B Blast Drying Oven vertical double air duct vertical hot air circulation PID temperature control
    BENTING CBGL-125B Blast Drying Oven vertical double air duct vertical hot air circulation PID temperature control

    Vertical design with bottom drum and bottom heater, turbine centrifugal fan blade to achieve vertical hot air circulation, Temperature Fluctuation +/- 1.0 ℃, studio volume 125L, PID microcomputer intelligent temperature control to ensure uniform and stable temperature.

    $ 958.00
    BENTING CBGLL-65BE Blast Drying Oven vertical double air duct vertical hot air circulation
    BENTING CBGLL-65BE Blast Drying Oven vertical double air duct vertical hot air circulation

    Vertical double air duct vertical hot air circulation design, temperature uniformity +/- 1.0 ℃, variable speed fan can adjust the air volume, large screen LCD display, independent temperature limit alarm system to ensure safe operation.

    $ 1009.00
    BENTING CBGL-45B Blast Drying Oven vertical double air duct vertical hot air circulation
    BENTING CBGL-45B Blast Drying Oven vertical double air duct vertical hot air circulation

    Adopt vertical double air duct vertical hot air circulation, Temperature Fluctuation +/- 1.0 ℃, Inner Chamber dimensions 350 × 350 × 350mm, equipped with PID microcomputer intelligent temperature control instrument and adjustable speed fan to ensure uniform and stable temperature.

    $ 683.00
    BENTING CBGLL-45BE Blast Drying Oven vertical double air duct vertical hot air circulation
    BENTING CBGLL-45BE Blast Drying Oven vertical double air duct vertical hot air circulation

    Vertical double air duct vertical hot air circulation design to ensure uniform temperature distribution, speed control fan can adjust the air volume according to experimental needs, Inner Chamber dimensions 350 × 350 × 350mm, volume 42L, with independent temperature limit alarm system and paraMeter memory function.

    $ 925.00
    BENTING CBGL-420BT Electric Blast Drying Oven vertical double air duct vertical hot air circulation
    BENTING CBGL-420BT Electric Blast Drying Oven vertical double air duct vertical hot air circulation

    Adopt vertical double air duct vertical hot air circulation, temperature control accuracy +/- 1.0 ℃, Temperature resolution 0.1 ℃, with timing and over-temperature alarm function, turbine centrifugal fan blade with bottom drum and bottom heating to ensure Temperature uniformity.

    $ 1719.00
    BENTING CBGL-65B Blast Drying Oven vertical double air duct vertical hot air circulation
    BENTING CBGL-65B Blast Drying Oven vertical double air duct vertical hot air circulation

    Adopt vertical double air duct vertical hot air circulation technology, Temperature Fluctuation +/- 1.0 ℃, studio volume 65L, equipped with turbine centrifugal fan blades and PID intelligent temperature control to ensure uniform temperature distribution and accurate temperature control.

    $ 751.00
    BENTING CBGL-30B Blast Drying Oven vertical double air duct vertical hot air circulation 0.8KW heating power
    BENTING CBGL-30B Blast Drying Oven vertical double air duct vertical hot air circulation 0.8KW heating power

    Vertical double air duct vertical hot air circulation design, high temperature uniformity, temperature control accuracy of +/- 1.0 ℃, studio volume 30L, equipped with turbine centrifugal fan blades and low noise blower, fan speed regulation, easy operation and maintenance.

    $ 603.00
    BOZHEN DGG-9076A vertical blast Drying Oven number microcomputer temperature control 0.1 ℃ accuracy
    BOZHEN DGG-9076A vertical blast Drying Oven number microcomputer temperature control 0.1 ℃ accuracy

    Adopt digital display microcomputer temperature controller, accuracy up to 0.1 ℃, with timing and temperature control protection function. Vertical forced convection design ensures uniform temperature in the working room, Temperature Uniformity +/- 2.0 ℃.

    $ 528.00
    BOZHEN DGG-9240A vertical blast Drying Oven mirror stainless steel liner 0.1 ℃ accuracy
    BOZHEN DGG-9240A vertical blast Drying Oven mirror stainless steel liner 0.1 ℃ accuracy

    Adopt digital microcomputer temperature controller with accuracy of 0.1 ℃, equipped with double-decked tempered Glass observation window and independent temperature limit alarm system. Vertical forced convection design ensures Temperature Uniformity +/- 2.0 ℃, volume 225L to meet a variety of experimental requirements.

    $ 804.00
    BENTING CBGLL-30BE Blast Drying Oven vertical double air duct vertical hot air circulation 0.8kw
    BENTING CBGLL-30BE Blast Drying Oven vertical double air duct vertical hot air circulation 0.8kw

    Vertical double air duct vertical hot air circulation design to ensure uniform temperature distribution, Inner Chamber dimensions 310 × 310 × 310mm, variable speed fan can adjust the air volume, large screen LCD display multiple sets of data, with paraMeter memory and over-temperature alarm function.

    $ 832.00
    BOZHEN DGG-9146A vertical blast Drying Oven digital display microcomputer temperature control 0.1 ℃ accuracy 136L volume
    BOZHEN DGG-9146A vertical blast Drying Oven digital display microcomputer temperature control 0.1 ℃ accuracy 136L volume

    Digital display microcomputer temperature controller accuracy of 0.1 ℃, vertical forced convection design to ensure the studio Temperature Uniformity +/- 2.0 ℃, equipped with double-decked tempered Glass observation window and independent temperature limit alarm system, support timing function and fan control.

    $ 672.00
    BENTING CBGL-140B Electric Blast Drying Oven vertical double air duct temperature control RT + 10~ 300 ℃
    BENTING CBGL-140B Electric Blast Drying Oven vertical double air duct temperature control RT + 10~ 300 ℃

    Vertical double air duct vertical hot air circulation to ensure temperature uniformity, temperature control accuracy +/- 1.0 ℃, turbine centrifugal fan blades with the bottom drum design, switch fan adjustable to prevent blowing powder items.

    $ 912.00
    DHG-9030BE vertical blast Drying Oven 304 stainless steel liner 300 ℃ temperature control
    DHG-9030BE vertical blast Drying Oven 304 stainless steel liner 300 ℃ temperature control

    304 stainless steel liner and double circulation air duct system, Temperature range RT + 10~ 300 ℃, Temperature Fluctuation +/- 1 ℃, with 0~ 9999 minutes timing function, suitable for drying, baking and other non-flammable and explosive materials processing.

    $ 465.00
    DHG-9140B vertical blast Drying Oven stainless steel liner PID temperature control
    DHG-9140B vertical blast Drying Oven stainless steel liner PID temperature control

    Adopt stainless steel liner and dual circulation air duct system, Temperature uniformity +/- 1 ℃, Temperature range RT + 10~ 300 ℃, equipped with High Accuracy Platinum Resistance Sensor and forced convection to ensure stable heating and rapid heating.

    $ 562.00
    Shanghai Pein DHG-9640B vertical blast Drying Oven vacuum powder drying heat sensitive substances
    Shanghai Pein DHG-9640B vertical blast Drying Oven vacuum powder drying heat sensitive substances

    High Accuracy Platinum Resistance Sensor is used to realize +/- 1 ℃ temperature fluctuation, with 9999 minutes timing function, three-layer tempered Glass observation window design to ensure safe and clear observation, suitable for vacuum drying environment of thermally sensitive substances for easy analysis.

    $ 1474.00

    Articles

    Application of High-Temperature Viscometer in Testing the Melt Viscosity Characteristics of Hot Melt Ink
    This article introduces a method for testing the melt viscosity of hot-melt ink using a high-temperature viscometer. The test employs a rotational viscometer to measure the viscosity of three ink samples at different temperatures.
    Application of High-Temperature Universal Testing Machine in the Study of Hot Modulus of Rupture of Refractory Materials
    This article introduces the application of a high-temperature universal testing machine in measuring the hot modulus of rupture of refractory materials. It explains the working principle, testing procedure, and key parameters of the testing machine, such as the effects of heating rate, holding time, and loading rate.
    How is a high-temperature muffle furnace applied in ash determination?
    This article introduces the application of high-temperature muffle furnaces in ash determination. The principle of ash determination involves completely burning the sample at high temperatures, leaving behind inorganic mineral residues. The muffle furnace provides a stable and controllable thermal environment, ensuring accurate results.
    Ultrasonic Thickness Gauge Selection: Technical Considerations for Probe Configuration and Measurement Modes
    This article primarily introduces the technical factors to consider when selecting an ultrasonic thickness gauge. In terms of probe configuration, the frequency affects both resolution and penetration depth, while crystal size determines adaptability to curvature and surface conditions. Dual-element probes offer a smaller dead zone compared to single-element probes, and delay-line probes are suitable for thin-wall and high-temperature applications.
    Application of Three-Chamber High and Low Temperature Test Chambers in Rapid Temperature Cycling for Electronic Products
    The three-chamber high-low temperature test chamber is used for reliability testing of electronic products, enabling rapid temperature transitions through independent high temperature, low temperature, and test zones. Compared to traditional single-chamber equipment, it reduces temperature change time and enhances testing efficiency.
    High-temperature viscometer evaluates the flow characteristics of ceramic coatings before sintering.
    This article introduces how to use a high-temperature viscometer to evaluate the flow characteristics of ceramic coatings before sintering. During measurement, the instrument detects changes in the viscosity of the coating sample under simulated sintering temperature conditions using rotational or oscillatory principles.
    High-temperature viscometer measures the flow behavior of powder coatings in the molten state.
    This article introduces the use of a high-temperature viscometer to measure the flow behavior of powder coatings in their molten state. Powder coatings need to melt and flow before curing, a process that directly affects the smoothness and performance of the coating.
    Temperature uniformity of high-temperature aging test chamber for UV resistance testing of inks
    This article discusses how the temperature uniformity of high-temperature aging test chambers affects the accuracy of ink UV resistance testing. Temperature uniformity refers to the deviation in temperature at various points inside the chamber, with smaller deviations leading to more reliable test results.
    High-temperature aging test chamber accelerates life testing of electronic components.
    The high-temperature aging test chamber accelerates the physical and chemical changes within electronic components by simulating high-temperature environments, thereby predicting their long-term performance and failure modes.
    Thermal shock test chamber measures the thermal shock resistance of polymer films.
    This article introduces how to test the thermal shock resistance of polymer films using a thermal shock test chamber. The test involves rapidly switching the film between high and low temperatures to simulate the drastic temperature changes that may occur in actual use, thereby generating thermal stress within the material.
    Hot air aging oven measures the long-term thermal-oxygen life of engineering plastics.
    This article introduces how to use a hot air aging oven to test the long-term thermal-oxidative lifespan of engineering plastics. The test is based on the Arrhenius equation, which accelerates material aging at high temperatures to simulate performance changes under actual usage conditions.
    Melt flow index tester measures the processing fluidity of high-temperature engineering plastics.
    This article introduces how a melt flow indexer measures the processing fluidity of high-temperature engineering plastics. It first explains the working principle of the instrument, which involves measuring the rate at which molten plastic passes through a standard die under specific temperature and pressure conditions to obtain the melt flow rate value.
    High-temperature aging chamber for testing thermal-oxidative aging of plastic films.
    This article introduces the method of testing the thermo-oxidative aging of plastic films using a high-temperature aging chamber. Thermo-oxidative aging refers to the chemical changes that occur in plastics under high temperature and oxygen exposure, leading to a decline in performance.
    Humidity and heat test chamber tests the moisture absorption rate of resin under high temperature and high humidity conditions.
    This article introduces the method of using a hygrothermal test chamber to measure the moisture absorption rate of resin under high temperature and high humidity conditions.
    Humidity and Heat Test Chamber for Evaluating Coating Performance under High Temperature and High Humidity Conditions
    This article introduces how a humidity and heat test chamber is used to evaluate the performance of coatings in high-temperature and high-humidity environments. Coatings are widely used in industries such as automotive and electronics, but they are prone to issues like reduced adhesion and blistering under actual high-temperature and high-humidity conditions.