MCU chip to achieve low power operation, equipped with intelligent Sensor to ensure +/- 3% detection accuracy and 30 seconds fast Response, support a variety of signal output for System integration, with flameproof structure to adapt to hazardous environments.
Explosion-proof enclosure design ensures stable operation in harsh environments, can simultaneously monitor multiple particle size dust concentration without changing the cutter, Measurement range 0.01-100 mg/m ³, built-in protective gas curtain to prevent Optical inspection system contamination.
Dedicated to calibrating ammonia Gas sensing electRodes, capacity 250ml, providing accurate calibrating support to ensure Reliability of detection data.
The melting temperature error is only +/- 1 ° C, allowing for remote observation of the melting state. It can be directly pasted without complex installation and is suitable for temperature monitoring of a variety of electrical equipment.
It can detect halogen gas leaks of less than 0.5 ounces per year, with an instantaneous Response Time and a Warm-Up Time of less than 90 seconds. It features automatic warm-up and battery protection, and a portable design weighing only 480 grams.
Adopt pre-treatment technology, adapt to high temperature, humidity and dust environment, equipped with 7-inch Touchscreen real-time display concentration Linear dispersion, detection error ≤ +/- 3% F.S, support 4-20mA and RS485 output, can realize automatic drainage and zero emission cycle function.
Adopt photometric 90 ° scattering measurement method, equipped with automatic cleaning brush and bubble measurement cell, support automatic sewage discharge and cleaning interval setting, Measurement range 0.00-500 NTU, Repeatability ≤ 2%.
250Ml Encasement Specification for Ammonia Gas Sensitive and Ammonium Ion Composite ElectRode, provides routine concentration adjustment for measurement accuracy and Stability.
Detect NH3 gas, range 0~ 100ppm, resolution 0.1ppm, Response Time T90 ≤ 120s, support sound and light alarm, Operating temperature -10~ 50 ℃, Working time for more than 60 hours, Portable design weighs only 170 grams.
The rated temperature is 55 ° C and the error is only +/- 1 ° C. The melting situation can be observed remotely, and it can be directly pasted for use in busbars or equipment terminals to monitor temperature changes.
Maximum 4 kinds of gas simultaneous detection, integrated temperature and Humidity compensation, with Internet of Things remote monitoring function, Response Time T90 ≤ national standard, Protection Rating IP66, suitable for a variety of Installation methods.
Measurement principle of cold mirror to eliminate system inertia error, accuracy of +/- 0.2 ° C, built-in electronic flowMeter to monitor 15-60L/h gas flow, system stability without repeability calibration.
Using 8-bit micro control technology, Response Time is less than 60 seconds, equipped with 12864 point array LCD display gas concentration, with sound, light and vibration triple Alarm mode, Protection Rating up to IP65.
Using 32-bit microprocessor and 24-bit ADC chip, support 1-6 Sensor expansion, with 4-20mA, RS485 and relay output, Protection Rating IP65, suitable for gas monitoring in harsh environments.
The imported movement motor has strong Power, the exhaust capacity is 456L/min to meet the high efficiency demand, the noise is only 53dB, and the operation is quiet. The gas storage Tank is treated with anti-rust and anti-bacterial treatment to ensure that the gas is clean.
