Using a formed pRoduction process, the wet film thickness is 52 microns, the application width is 300 mm, and the stainless steel material ensures durability and easy cleaning, suitable for hand-held operation.
Using formed process, the film thickness is 6.9 μm, the accuracy is 0.1 μm, the continuous wire is easy to clean, no additional handle is required, and there are 50mm hand-held parts at both ends, which is suitable for efficient Spreader operation.
Made of 303 stainless steel, it is not easy to break the wire and has a long service life. The effective width of the Spreader is 30cm, the wet film thickness is precisely controlled at 54.9 microns, and the two ends are designed with hand-held parts for easy operation.
Adopting formed pRoduction process, wet film thickness 52.6 μ m, application width up to 300mm, with 50mm hand-held parts at both ends for easy operation, stainless steel material to ensure long-term use Stability.
Adopt gear pair drive, hand-pressed operation, rated load 500N, Travel 70mm, the upper and lower height of the frame can be adjusted, Force Gauge has a positioning structure, suitable for batch testing.
The formed process is used to achieve 300 micron wet film thickness, the total length of 400mm is equipped with a 50mm hand-held area for direct operation, and the stainless steel material ensures Abrasion Resistance and anti-corrosion performance to meet the needs of thick film experiments.
Adopt gear pair transmission, hand-pressed operation, the height of the frame can be adjusted up and down, Force Gauge up and down movement is equipped with positioning structure, rated load 500N, Travel 70mm, suitable for batch testing.
Travel range of pressure needle 0~ 2.5mm, measurement error +/- 1HAO, suitable for low Hardness rubber and sponge materials, can be hand-held or installed on a fixed load measuring rack.
Hand type easy to operate, load 1000g, standard 6B-6H pencil, suitable for film hardness testing, test temperature 23 +/- 2 ℃ and Humidity 50 +/- 5% environment.
Suitable for medium Hardness rubber, thermal plasticity resilience and other materials, Measurement range 0-100HB, can be hand-held or matched with a fixed load test bench to ensure stable measurement.
The pressure spring constant linear relationship, pressure needle Travel 0-2.5 mm, measurement error +/- 1HC, can be hand-held or installed measuring frame, suitable for shoe microporous hardness of materials testing.
Double groove structure with graded slope design, Measurement accuracy of +/- 2 microns, wear-resistant and anti-corrosion stainless steel material, hand-held operation, suitable for rapid detection of various material fineness.
Measurement range 0~ 10mm, accuracy ≤ 0.02mm, probe center to the maximum measurement depth 130mm, Dial reading, portable handheld design, suitable for on-site rapid detection.
Measurement range 0-10mm, accuracy ≤ 0.02mm, Graduation 0.001mm, probe diaMeter Φ 20mm plane, portable handheld design, in line with chemical industry standards.
Measurement range 0-1mm, Graduation 0.001mm, probe diaMeter 5mm plane design, portable handheld for rapid measurement in the workshop, in line with industry standards.
