Adopting spiral trapezoidal screw, it has the characteristics of manual operation, simple stability, vertical and lying dual-use, the maximum load is 500N, and the tensile force is Travel 200mm. It is suitable for tensile and compressive load, insertion and unplugging force, and failure test.
Adopt trapezoidal screw drive and integral nut design, rated load 500N, Travel 150mm, can be firmly clamped to prevent partial load, fast loading and unloading to improve measurement accuracy, vertical and horizontal dual-use to adapt to a variety of test scenarios.
Using formed process, wet film thickness 35 microns, application width 400mm, continuous wire, uniform film and good repRoducibility, easy to clean after the experiment.
Adopt trapezoidal screw drive, rated load 500N, Travel 150mm, with manual operation, simple and stable, vertical lying dual-use and other characteristics, suitable for tensile and compressive load and failure test.
It adopts trapezoidal screw drive and side handwheel loading mode, which is stable and easy to operate. It is equipped with a mobile base platform, which can realize free movement of front, rear, left and right. The rated load is 500N, and the Test Travel is up to 250mm, which meets a variety of mechanical testing requirements.
Speed range 0-3000rpm, Processing capacity 10-100L, Electric lift Travel 700mm, can be equipped with multiple containers alternately used, stirring vibration low noise, to achieve rapid dispersion homogenization.
Equipped with a digital ruler to collect displacement data, the resolution is up to 0.01mm, the maximum measurement load is 500N, the base has a mobile platform for easy installation of fixtures, and the side handwheel is easy to load and operate.
Adopt electric lift design, lift Travel up to 500mm; Equipped with 2200W three-phase asynchronous motor, Speed range 0-2800rpm; Support four rotation stator head replacement, adapt to different viscosity material handling needs.
Using handwheel swirl/spin screw to control displacement, smooth operation and simple operation, rated load 500N, Test Travel 0~ 200mm, vertical horizontal dual-use design for easy installation and use.
The equipment adopts a spring lift system and a variable frequency motor, with a speed range of 60-8000rpm and a power of 750W. It has the characteristics of brushless abrasion and low noise, and can be adapted to a variety of impellers and Mixing Tanks for accurate experiments.
Adopt dual-axis constant force lifting system, lift Travel 200mm, speed range 60-8000rpm, digital direct display Rotation speed, equipped with dispersed impeller and sand grinding disc, adapt to different experimental needs.
Special rotor-stator structure is adopted to achieve stepless speed regulation of 60-2800rpm, 720mm electric lift Travel, material withstands high-frequency shearing, and fine emulsification dispersion is completed in a short time.
The equipment uses a spring lift system, lift Travel 200mm, speed range of 60~ 8000rpm, can adapt to different experimental needs, through the digital PID technology implementation High Accuracy control, and provide dispersed impeller and sand grinding disc.
Set dispersion and Stir functions in one, the two processes of dispersion and homogenization are completed by one machine, with high efficiency, good mixing effect and easy cleaning. Speed range 100~ 8000rpm, maximum processing viscosity 100000mPa.s, electric lifting mode is simple and convenient to operate.
Using 4000W three-phase asynchronous motor, Speed range 0-2800rpm, equipped with a variety of stator heads to adapt to different material viscosity, electric lift Travel up to 700mm, support long-term operation with low temperature rise.
