Impact angle of 90 °, can test 5 groups of specimens at the same time, the minimum reading value is 0.005 kg-cm, the mechatronics design is compact, and meets the requirements of many international standards.
Can measure 20~ 1000J/m ² Internal Bond Strength, resolution of 0.001lbf/in ², using 90 ° Impact Angle test principle, clamping force 0~ 40kg/cm ² adjustable.
The two-stage gravity overlap structure ensures accurate measurement, with a resolution of 0.001 lbf/in ², supports fully automatic release and real-time calibrating, and is suitable for internal bond strength testing of various sheet materials.
Using 7.0 inch touch screen display and hydraulic viscose sample pressing technology, the pressure is automatically adjusted, the Test accuracy reaches 0.01J/m ², the whole machine has strong rigidity to reduce vibration energy loss, and is suitable for a variety of Cardboard interlayer bonding force detection.
Measurement range 20~ 1000J/m2, resolution up to 0.01J/m2; Impact angle 90 °, can accurately test the internal bond strength, suitable for multi-layer paper quality control.
Adopt stepper motor to achieve stepless speed regulation of 1~ 500mm/min, equipped with 500N force value Measurement range and +/- 1% accuracy level, with overload protection and limit protection functions, stable and reliable operation.
It can cut 140mmx25.4mm samples, sampling thickness ≤ 1mm, Operating temperature 20~ 40 ℃, suitable for auxiliary sampling of Internal Bond Strength test.
Five sets of specimens can be tested simultaneously, supporting 0-900N compression force adjustment, with 0.005ft.lb high Accuracy grade and 90 ° Impact angle, meeting a variety of standard unit requirements.
Using precision screw pair and servo motor drive, the test speed range is 1~ 500mm/min, the effective stroke is 800mm, with overload protection and limit protection functions, and the operation is stable and reliable.
Using pneumatic adhesive sample pressing and automatic release, the test range is 0-1000J/M ², the accuracy is 0.001J/M ², the Z-direction failure energy is measured by pendulum Impact measurement, and the structural rigidity is strong to reduce energy loss.
Maximum load 50Kg, Test speed 10~ 60mm/min adjustable, using pointer sensing mode, effective Travel 0~ 360mm, suitable for vertical angle disbonding test.
Glass thickness and air interlayer thickness can be measured at the same time. Glass thickness range is 70mm, air interlayer range is 34mm, light and portable operation is simple.
Using high-performance ARM processor and 24-bit sampling chip, Measurement range 0-1000J/m ², accuracy < 1J/m ², with automatic testing and intelligent judgment functions, equipped with micro-printer real-time output data.
With 0.5 accuracy and 200kg capacity, it supports a variety of disbonding tests such as 180 ° and 90 ° disbonding, automatically records Linear dispersion and analyzes MAX Maximum, MIN Minimum and Average for a variety of material inspections.
Measurement accuracy of 0.5 with High Accuracy Sensor, speed range 5~ 500mm/min, support automatic Linear dispersion analysis and multi-point data collection, tensile, tear and disbonding tests.
