Folding angle 0 °~ 142 ° stepless adjustable, folding speed 10~ 2000cpm, spring tension 4.91~ 14.72N, with a variety of folding mouth gap distance selection, support real-time data display and thermal print output.
Equipment with 12 sets of fixtures, bending angle 22.5 °, can be 100 +/- 5cpm folding test, suitable for upper, clothing, bags and other thin material folding endurance evaluation.
Vacuum principle measurement paper breathability performance, Measurement range 0-1000ml/min, test area of 10cm ², suitable for a variety of industrial paper mass detection.
Temperature range -30 ℃ to + 100 ℃, equipped with stainless steel inner and outer boxes and environmentally friendly refrigerant, supports multi-station fixture testing, can precisely control the folding mode and record data changes in real time.
Adopt S-type Tension Sensor to Ensure High Accuracy, Built-in Micro Hydraulic System, Support Strength and Force Measurement modes, Continuous Operating Time over 200 hours, Range 0~ 10KN.
Aluminum alloy body and micro hydraulic system, Range 0~ 6.000KN, Continuous Operating Time more than 200 hours, with 5-segment fold line correction and dual Measurement mode to ensure Test accuracy and Stability.
The sampling size of the equipment is 300 * 320mm, and the parallelism of the incision is less than or equal to 0.1mm. It can accurately detect the mechanical properties such as paper tension resistance, elongation and fracture length, and meets the requirements of many national standards.
Measurement range 10~ 500mN, resolution 5mN, tear arm 104mm, paper size 25 * 15mm, suitable for accurate determination of paper Tear strength.
Using the Cobb test method, the test area is 100cm ² +/- 0.2, and the pressure roller mass is 10kg +/- 0.5, which is suitable for the detection of Water Absorbency on the surface of sizing paper and Cardboard, and is not suitable for loose or unsizing paper.
Measurement range 0-20mm, accuracy 0.001mm, contact pressure 20 +/- 5kPa, suitable for paper, Cardboard and sheet material Film thickness detection, in line with a number of international standards.
Measurement range 0~ 1000ml/min, test area 10cm ², test area pressure difference 1kPa, suitable for a variety of industrial paper ventilation performance detection.
The Water Absorbency of paper surface was measured by Cobb test method, the test area was 100cm ², the cylinder height was 50mm, the absorbent paper Basis Weight was 200~ 250g/m2, and the pressure roller mass was 10kg to ensure the accuracy of the test.
Measurement range 10~ 1000mN, Indication Error +/- 1%, suitable for a variety of paper samples, to ensure test accuracy and Repeatability, easy and reliable operation.
The bearing with accurate guidance and reasonable fulcrum structure, good sampling Repeatability, can handle materials with a thickness of 0.1-1 mm, support 70 * 38mm fold stiffness and 38 * 36mm crease stiffness two sizes, long side parallelism ≤ 0.015mm.
Suitable for paper tubes with an outer diaMeter of 200mm, automatic return and judgment of crushing force, adjustable speed of 10~ 150mm/min, High Accuracy Sensor ensures accurate sampling, supports a variety of Unit switching and direct printing.
