Maximum compressire strength 50KN, platen size 1200 * 1200mm, with three test modes of compressire strength, stacking strength and fixed distance, support 7-inch Touchscreen operation and thermal printing function.
Measurement range 0-3000N, accuracy up to +/- 1% of the reading, equipped with 7-inch screen display test Linear dispersion, with automatic conversion of edge pressure strength, ring pressure strength and other functions, support data statistics and micro printing.
Can measure 20~ 1000J/m ² Internal Bond Strength, resolution of 0.001lbf/in ², using 90 ° Impact Angle test principle, clamping force 0~ 40kg/cm ² adjustable.
Suitable for a variety of Corrugated Board adhesive strength test, equipped with different specifications of steel needles, needle diaMeter range 1.0-3 mm, support A, B, C, E corrugated test, sample size 25 × 80mm.
The two-stage gravity overlap structure ensures accurate measurement, with a resolution of 0.001 lbf/in ², supports fully automatic release and real-time calibrating, and is suitable for internal bond strength testing of various sheet materials.
Using wire-wound stainless steel wire structure, the film thickness is 100 microns, the total length is 375mm, and the application width is 255mm to ensure that the Spreader is uniform and firm, suitable for precision experimental operation.
Measurement range 20~ 1000J/m ², resolution 0.1J/m ², with Touchscreen operation and thermal printing function, suitable for a variety of Cardboard Internal Bond Strength accurate determination.
It has three test functions of compressire strength, stacking strength and fixed distance and fixed force, force value range 2T, measurement size 1200 * 1200 * 1200mm, support stepless speed regulation and real-time Linear dispersion display, easy to operate.
With compressire strength, stacking strength and fixed distance force test function, force value range of 50KN, support 5~ 300mm/min stepless speed regulation, 7-inch Touchscreen real-time display of compression Linear dispersion, automatic recording of pressure peak and deformation, to ensure High Accuracy measurement.
The 10x30mm standard size design ensures a perfect match with the SH1117 Tester, providing accurate gel strength measurement results.
Using signal transmission pressure, automatically retain the maximum Breaking strength value, Measurement range Cardboard 250~ 5600KPa, paper 50~ 1600KPa, indication accuracy ≤ +/- 1% F. S, oil feeding speed adjustable.
Wire-wound design wet film thickness 11.4μm, wire diaMeter Φ 0.13mm, not easy to block and easy to clean, suitable for a variety of substrates, to achieve uniform Spreader and flexible thickness adjustment.
Dedicated to lead ion detection system, 250ml standard Encasement, ElectRode potential stability is ensured by adjusting ion strength, and measurement accuracy and Repeatability are improved.
Adopt pressure transducer induction, digital indication, capacity 0~ 100kg/cm ², clamp ring diaMeter is 31.50mm, automatically retain the maximum Breaking strength value and support data printing.
With three test functions of compressire strength, stacking strength and fixed distance and fixed force, the force value range is 1T, the pressure plate size is 600 * 600mm, and it supports 7-inch Touchscreen real-time display of compressive Linear dispersion, which can directly obtain statistical results and automatically diagnose faults.
