Adopt 850nm infrared LED Illuminant and ratio correction technology to effectively reduce Color interference; with IP65 Protection Rating, support automatic range switching and zero point calibrating, Repeatability is +/- 1% F.S.
Measurement principle of scattering-transmitted light, automatic chroma compensation, Measurement range 0~ 200.0NTU, Repeatability +/- 1% F. S, support multi-point calibrating and automatic range switching.
Infrared LED Illuminant meets ISO 7027 standard, supports scattering and scattering-transmitted light Measurement principle, Measurement range 0.00-2000 NTU, IP65 Protection Rating to ensure outdoor use Reliability.
Using 860nm Infrared LED Illuminant and Scatter-Transmission Measurement principle, supports automatic range switching and 7 point calibrating, with IP54 Protection Rating and 2000 sets of data storage capacity to ensure measurement Stability and data traceability.
Adopt 860nm infrared LED Illuminant, in line with ISO7027 standard; Support scattering and scatter-transmission dual Measurement principle; With IP65 Protection Rating and automatic range switching function; Standard long-lasting turbidity calibrated set.
Wet film thickness 13.7 μ m, formed process without wire-wound, wear-resistant stainless steel material, total length 40cm, application width 30cm, easy to clean.
Using one-piece casting process, strong and not easy to deform, maintaining test parallelism; Measurement range 0~ 4mm, resolution 0.01mm, contact pressure 100 +/- 10kPa, contact area 2 +/- 0.05cm ², in line with standard requirements.
Spreader formed process to ensure uniform, wet film thickness of 80 microns, diaMeter 10mm design and stable operation, 304 stainless steel material durable and unbroken wire, easy cleaning and maintenance.
Spreader formed process to ensure uniform wear-resistant stainless steel material corrosion-resistant durable, wet film thickness of 450 μ m, effective application width of 300mm, without the handle directly grip operation.
Using formed process, wear-resistant stainless steel material is easy to clean and anti-corrosion, the total length is 400mm, the effective application width is 300mm, and the wet film thickness is 550μm.
Using formed process, wear-resistant stainless steel material is easy to clean and anti-corrosion, the total length is 400mm, the effective application width is 300mm, and it can be prepared with 275μm wet film thickness, without the handle directly holding the scraping.
Using stainless steel material and excellent wire-wound process, wet film thickness 148.6μm, application width 300mm, to ensure accurate and durable film, to avoid the problem of broken wire.
Formed process design, wet film thickness 20μm, effective application width 500mm, stainless steel material easy to clean and corrosion resistance, can precisely control the fluid and maintain coating uniformity.
The formed process is used to achieve 250μm wet film thickness, the total length is 400mm, the effective Spreader width is 300mm, and the wear-resistant stainless steel material ensures long service life, easy cleaning and no blockage.
The wet film thickness can be as low as 1.5 μm, the groove bottom is wider to provide greater Coating Weight, the chrome plating surface and extrusion process ensure durability and easy cleaning, avoiding the problem of traditional steel wire loosening.
