Tensile Strength and elongation paraMeters can be detected, test force 500-3000N optional, accuracy +/- 1%, stepless speed 1-500mm/min, suitable for all kinds of paper and Cardboard materials.
Test method to achieve tensile compression test, Accuracy grade 1, equipped with 7-inch touch screen display tensile curve, support 50 kinds of fixtures to meet more than 1000 material testing needs.
Accessories can detect buttons and other fixed strength, to prevent loosening caused by sharp edge angle damage, the maximum tensile force of 30kg, suitable for clothing toys footwear and other pRoducts adhesion testing.
Control mode with high accuracy, equipped with cross latch universal joint to ensure concentricity. Measurement range 300N, speed adjustment 1-500mm/min, with pull-off stop and peak hold function.
Cross latch universal joint structure ensures concentricity, high closed-loop control accuracy, adjustable displacement rate of 1-500mm/min, load Measurement accuracy of +/- 1%, with pull-off shutdown and overload protection functions.
Control mode closed-loop high accuracy, Force Measurement range 300N, displacement rate 1-500mm/min stepless speed, with overload protection and cross joint structure, can be fixed elongation force measurement value and other multivariate tests.
Control mode with closed loop, accuracy of +/- 1%, speed range of 1-500mm/min stepless speed regulation, with pull-off shutdown, peak holding function, universal joint structure to eliminate the influence of the sample.
Control mode with closed loop, accuracy of +/- 1%, speed range of 1-500mm/min, with cross latch universal joint structure, effectively ensure the test concentricity and eliminate the influence of irregular samples.
Using ball screw and 3 guide shaft drive mechanism, Measurement range 0-1000N, support a variety of sample size and tensile speed adjustment, built-in thermal printer and RS232 Communication interface.
Adopt horizontal structure and High Accuracy deceleration servo drive system, equipped with precision ball screw and double linear slide rail, force value resolution up to 0.001N, support a variety of stop modes and unit selection, can realize stepless speed regulation function.
Using horizontal structure and High Accuracy deceleration servo drive system, equipped with 0.001N force value resolution and 0.001mm Displacement resolution, supports multiple stop modes and unit selection, suitable for accurate mechanical properties testing of thin sheet materials.
Can measure 20~ 1000J/m ² Internal Bond Strength, resolution of 0.001lbf/in ², using 90 ° Impact Angle test principle, clamping force 0~ 40kg/cm ² adjustable.
The ball screw drive is used to ensure smooth and accurate operation, the force value range is 500N resolution 0.01N, and a variety of test procedures are integrated to support professional testing such as tensile disbonding and tearing.
Control mode closed loop accuracy, Measurement range 50N to the maximum load, displacement rate 1-500mm/min stepless speed, equipped with universal joint structure to ensure the test concentricity and eliminate the influence of irregular samples.
Full digital control AC motor, speed accuracy of 0.5%; aluminum extrusion sealing plate built-in double roller screw structure, Test speed range of 0~ 300mm/min, with upper and lower limit and overload protection function.
