The thickness of the pressurable steel plate Aluminum Panel is 0.2~ 1.5mm, the weight of the whole machine is 50kg, and the compact shape is only 300 * 300 * 190mm, which meets the NCCA standard T-Bend test method.
The cone shaft length is 203mm and the large end diaMeter is 38mm, which can test the cone bending resistance of a single layer or the entire coating system separately. Operating temperature is 23 +/- 2 ℃ and relative humidity is 50 +/- 5%.
Range 5-50p, accuracy of +/- 2%, equipped with 5 kinds of special calibrated oil to ensure measurement accuracy, as the core component of cone-plate viscoMeter to ensure test Stability.
With +/- 0.1% accuracy Sensor and 0.01mN resolution, it supports 1-92 ° bending angle adjustment and 0.5-50 °/sec angular speed control, with self-Adjustment and three independently adjustable test angles, suitable for 0.01-5 thickness materials.
Measurement accuracy +/- 2%, equipped with 5 calibrated oils to ensure measurement accuracy, as a special accessory for cone-plate viscoMeter to achieve stability testing.
Support 0.1-1 steel plate and 0.1-2 Aluminum Panel test, can complete 0T to 1T multi-stage bending, equipped with pliers pressing device and tape adhesion inspection function, to meet the standard bending test process.
Measurement accuracy of +/- 2% with a cone rotor range of 0-10p, requires only 30 μl of sample volume, and provides 5 calibrated oils to ensure measurement accuracy.
Measurement accuracy of +/- 2% with a range of 10-100p, 5 calibrated oils for measurement accuracy, High Accuracy rotor designed for cone-plate viscoMeters.
Viscosity measurement range 0-5p, accuracy +/- 2%, equipped with 5 special calibrated oils to ensure measurement accuracy, High Accuracy rotor designed for cone-plate viscoMeters.
Manually pressing the sealing cone and adjusting the rising speed with the heavy hammer, the spring pre-tightening mechanism enhances the sealing performance, the Measurement range is 1~ 100 ° SR, and the discharge time of the overflow port is 149 +/- 1 second.
The shear rate is 5.0N, the sample volume is only 170μL, the applicable viscosity range is 50~ 100000mPa · s, suitable for a variety of fluid measurement, high measurement accuracy.
Measurement width 200mm, thickness within 1.5mm test plate, stainless steel cone diaMeter range 3.2-38 mm, anodic oxidation aluminum material, complete 180 ° bending test within 15 seconds.
The shear rate is 2.0N, the sample volume is only 400 μL, the applicable viscosity range is 125~ 250000mPa · s, and the accuracy is +/- 2% F. S, which is suitable for a variety of fluid tests.
The shear rate is 13.3N, the sample volume is only 67 μL, the applicable viscosity range is 20~ 37500mPa · s, and the accuracy is +/- 2% F. S, which is suitable for a variety of fluid tests.
Using 7-inch Touchscreen operation, Gigabit network port to ensure reliable data transmission, viscosity range 10.5-7800 000 mPa · s, support power and kinematic viscosity automatic conversion, to meet a variety of fluid testing needs.
